3M
3M RV10-10Q Ring Terminal #10 Stud 10 AWG 1000 V Vinyl Insulated
Yellow vinyl-insulated ring terminal accepts 10–12 AWG wire, crimps to a #10 stud and is rated to 1,000 V with UL and CSA listings
- TypeElectrical Connectors
- Crimp termination ensures a secure, reliable connection
- 10 AWG wire capacity suits heavy-duty electrical loads
- Vinyl insulation withstands -40 °F to 221 °F operating range
- CSA certified and UL listed for verified safety compliance
- Pack of 25 terminals provides ample supply for multiple jobs
3M RV10-10Q Ring Terminals for 10 AWG Wiring
These yellow vinyl-insulated ring terminals accept 10 to 12 AWG wire and feature a #10 stud hole. They are designed for crimp termination on copper conductors in automotive or general electrical work. The pack contains twenty-five pieces for multiple connections.
600 V Rating With 1000 V Insulation Headroom
The vinyl insulation is rated for 1000 V while the connector carries a 600 V maximum operating voltage. This margin handles standard low-voltage vehicle and equipment circuits comfortably. The butted barrel design supports solid crimps on 10 AWG wire but is not suited for larger gauge conductors.
CSA Certified and UL Listed Butted Barrel
The tin-plated copper barrel has a 0.14 in inside diameter and 0.25 in length with a 0.38 in tongue width. It operates from -40 to 221 degrees F and meets CSA and UL standards. The vinyl sleeve resists abrasion but is not rated for continuous high-temperature environments.
Highlights
- Crimp termination ensures a secure, reliable connection
- 10 AWG wire capacity suits heavy-duty electrical loads
- Vinyl insulation withstands -40 °F to 221 °F operating range
- CSA certified and UL listed for verified safety compliance
- Pack of 25 terminals provides ample supply for multiple jobs
Specifications
| Brand | 3M |
|---|---|
| Type | Electrical Connectors |
Questions about this item
Will the 10 AWG ring terminal fit the #10 studs on my older battery terminal?
Yes, the #10 stud size matches standard #10 hardware, and the 0.38 inch tongue width fits typical battery posts.
How can I verify the crimp is solid on the 10 AWG wire after installation?
A proper crimp fills the 0.14 inch barrel inside diameter, shows no loose strands, and the vinyl insulation stays seated at 221 degrees F maximum.
Does the 25-piece pack include the crimp tool or heat shrink for the vinyl insulated terminals?
The pack contains 25 ring terminals only; a compatible crimp tool for butted barrels and any additional insulation must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains 2-Position Speaker Terminal Block 2 Pcs
- HI - Wire & Cable C…



