We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
50 bare nickel-alloy ring terminals for 10 AWG wire #10 stud 0.38 in tongue 0.73 in long

3M

3M MU10-10RHTX Ring Terminal #10 Stud 10 AWG 600V Bare 50 Pack

SKU CH-EXVQ-FZ6QR

Bare ring terminals accept 12–10 AWG wire, fit #10 studs, and are rated for 600 V at 900 °F in a 50-piece pack

  • TypeElectrical Connectors
  • Handles 10 AWG wire for secure power connections
  • Brazed barrel resists vibration and pull-out forces
  • 600 V rating supports automotive and industrial circuits
  • CSA and UL listed for code-compliant installations
  • 50-piece pack covers multiple wiring jobs

3M MU10-10RHTX Ring Terminals

These 3M ring terminals accept 10 to 12 AWG wire and feature a #10 stud size for secure bolt-on connections. The bare nickel-alloy barrel is rated for 600 volts and temperatures up to 900 degrees F. A brazed seam prevents the barrel from splitting during the crimp process. The pack contains 50 non-insulated terminals for high-volume wiring jobs.

Verify wire gauge and stud clearance

Confirm your conductors fall within the 10 to 12 AWG range before ordering these terminals. The #10 stud hole requires a matching bolt or screw diameter for proper mechanical retention. Ensure the 0.38 inch tongue width fits within the terminal block or bus bar spacing available in your panel. The non-insulated barrel leaves the crimp joint exposed, so plan for separate heat-shrink or tape if insulation is required by code.

Bulk pack supports production workflows

The 50-piece quantity reduces re-order frequency for maintenance teams and assembly lines. CSA certification and UL listing satisfy common electrical inspection requirements without additional documentation. Bare barrels allow visual verification of crimp quality and wire insertion depth during quality checks. Nickel-alloy contacts resist oxidation in high-temperature environments better than standard copper finishes.

Highlights

  • Handles 10 AWG wire for secure power connections
  • Brazed barrel resists vibration and pull-out forces
  • 600 V rating supports automotive and industrial circuits
  • CSA and UL listed for code-compliant installations
  • 50-piece pack covers multiple wiring jobs

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

What comes in the pack and do I need to buy anything else to install these terminals?

The pack contains 50 bare ring terminals. No insulation or tools are included, so a suitable crimp tool for 10–12 AWG wire must be purchased separately.

How do I decide between the 10 AWG and 12 AWG wire range listed for these terminals?

Each terminal accepts 10 AWG down to 12 AWG. Choose the wire gauge your circuit requires; the same terminal covers the full range.

What does the 600 V rating mean when the terminal is crimped in a real circuit?

It means the connection is UL Listed and CSA Certified for continuous operation up to 600 volts at the crimped joint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.