We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow nylon insulated fork terminals, fifty pieces, crimp style, #8 stud, 10 AWG

3M

3M MNG10-8FBX Fork Terminal #8 Stud 10 AWG 600 V Nylon Insulated 50 Pack

SKU CH-HFM9-1ZXCG

Nylon-insulated fork terminals accept 10 to 12 AWG wire, crimp onto #8 studs, and are rated for 600 V at 221 °F in a 50-pack

  • TypeElectrical Connectors
  • Crimps 10–12 AWG wire for secure connections
  • Butted seam barrel resists pull-out under vibration
  • Nylon insulation withstands 221 °F operating heat
  • UL Listed and CSA Certified for code compliance
  • 50 terminals per pack for volume wiring jobs

10 AWG Nylon-Insulated Fork Terminals

These 3M fork terminals accept 10 to 12 AWG wire and feature a #8 stud size with a butted-seam copper barrel. The nylon insulation is rated for 600 V and a maximum operating temperature of 221 degrees F. Each pack contains 50 terminals.

Suited for crimp connections on #8 studs

Installers needing a yellow-coded, insulation-grip barrel for 10 or 12 AWG conductors will find these terminals match the spec. They are not intended for larger wire gauges, different stud diameters, or non-crimp termination methods.

Verify wire gauge and stud compatibility

Confirm the conductor falls within the 10 to 12 AWG range and that the mounting hardware uses a #8 stud. Check that the 0.55 in barrel length and 1.03 in overall length fit the available space in your terminal block or panel.

Highlights

  • Crimps 10–12 AWG wire for secure connections
  • Butted seam barrel resists pull-out under vibration
  • Nylon insulation withstands 221 °F operating heat
  • UL Listed and CSA Certified for code compliance
  • 50 terminals per pack for volume wiring jobs

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

Do I need a specific crimp tool for the 10-12 AWG barrel on these 3M MNG10-8FBX terminals?

Yes, use a ratchet crimper sized for 10-12 AWG insulated terminals; the butted-seam barrel and insulation grip require even compression to meet the UL and CSA listings.

Will the #8 fork fit on the existing #8 studs in my fuse block without filing?

The fork is sized for a standard #8 stud; it slides over the threads before the nut is tightened, so no filing is needed if the studs are clean and undamaged.

How can I confirm each crimp is solid after I finish the harness?

Perform a tug test on every wire; a proper crimp on 10-12 AWG copper will hold the insulation grip and barrel without the conductor pulling free.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.