We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow heat-shrink fork terminals, 25 pack, #8 stud, 10 AWG

3M

3M MH10-8FLX Fork Terminal #8 Stud 10 AWG 600 V Heat Shrink 25 Pack

SKU CH-MVB0-FNT0X

Yellow heat-shrink fork terminals accept 12–10 AWG wire, fit #8 studs, and are rated for 600 V at 221 °F in a 25-pack

  • TypeElectrical Connectors
  • Heat-shrink seal resists moisture and vibration
  • Brazed seam stays intact under heavy crimp loads
  • CSA certified and UL listed for code compliance
  • Fits 12-10 AWG wire with #8 stud
  • 25 terminals per pack for multiple jobs

Fork terminal for 10–12 AWG wiring

These 3M MH10-8FLX fork terminals accept 10 to 12 AWG copper wire and carry up to 600 V. Each connector uses a brazed seam and heat-shrink insulation rated to 221 °F. The pack contains 25 pieces for automotive or industrial electrical work.

Capacity and headroom for 10 AWG circuits

The 10 AWG maximum wire size gives solid capacity for typical accessory and lighting circuits, while the 12 AWG minimum allows a step-down when needed. Heat-shrink insulation adds environmental protection, but the 600 V rating sets the hard ceiling for higher-voltage systems.

Crimp-on #8 stud mount with heat-shrink seal

A #8 stud opening fits common terminal blocks and bus bars, and the crimp connection requires only a standard hand tool. Heat-shrink tubing seals the joint after crimping, freeing the installer from separate tape or sleeving steps.

Highlights

  • Heat-shrink seal resists moisture and vibration
  • Brazed seam stays intact under heavy crimp loads
  • CSA certified and UL listed for code compliance
  • Fits 12-10 AWG wire with #8 stud
  • 25 terminals per pack for multiple jobs

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

Will the #8 stud fork terminals fit on the same terminal blocks I use with my existing 10 AWG ring terminals?

The #8 stud size matches common terminal block screws, so these fork terminals can share the same mounting hardware as your current 10 AWG connectors.

How can I confirm the heat-shrink insulation has sealed properly after crimping?

After crimping, apply heat until the yellow tubing shrinks tightly around the wire and adhesive flows at both ends, showing a uniform seal.

Does the 25-pack include a crimp tool or must I supply my own?

The package contains only the 25 fork terminals; a suitable crimp tool for 10-12 AWG brazed-seam copper connectors is not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.