We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow insulated fork terminal with heat-shrink tubing, 25 pieces

3M

3M MH10-10FLX Fork Terminal #10 Stud 10 AWG 600 V Heat Shrink

SKU CH-BG8Q-RX4HP

Heat-shrink fork terminals for 10–12 AWG wire, #10 stud, 600 V, UL and CSA listed, 25 pieces

  • TypeElectrical Connectors
  • Heat-shrink insulation seals out moisture
  • Brazed seam prevents the barrel from splitting under load
  • Crimp connection handles 10 AWG down to 12 AWG wire
  • UL Listed and CSA Certified for 600 V service
  • Pack of 25 terminals speeds up panel wiring

10 AWG Fork Terminal for #10 Stud

This 3M MH10-10FLX fork terminal accepts 10 to 12 AWG copper wire and fits a #10 stud. The brazed seam and heat-shrink insulation create a sealed, moisture-resistant crimp connection rated for 600 V. It is UL Listed and CSA Certified for compliant electrical installations. The yellow colour coding identifies the wire range at a glance.

25-Pack Capacity for Panel and Harness Work

A box of 25 terminals covers multiple connection points in a control panel, automotive harness or marine wiring job. The 1-inch overall length fits standard terminal blocks and barrier strips without crowding. The 221 °F temperature rating handles engine-bay heat and industrial environments. The heat-shrink sleeve shrinks during crimping, eliminating a separate insulation step.

Upgrade from Non-Sealed Ring or Spade Terminals

This fork terminal replaces open-barrel spades or ring terminals that lack environmental sealing. The jump is worth it when vibration, moisture or chemical exposure risk corrosion on bare crimps. It is not suited for wire larger than 10 AWG or studs smaller than #10. Buyers needing a ring tongue for bolt retention should select a ring-terminal version instead.

Highlights

  • Heat-shrink insulation seals out moisture
  • Brazed seam prevents the barrel from splitting under load
  • Crimp connection handles 10 AWG down to 12 AWG wire
  • UL Listed and CSA Certified for 600 V service
  • Pack of 25 terminals speeds up panel wiring

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

Will the yellow 10 AWG heat-shrink fork terminals fit the #10 studs on my existing terminal block?

Yes, each terminal is built for a #10 stud and accepts 10 to 12 AWG wire, so it matches the stud size and wire range of standard blocks.

How can I confirm the crimp and seal are correct after installation?

After crimping, apply heat until the yellow tubing shrinks fully and adhesive flows; the joint should show no bare conductor and the insulation should be smooth and sealed.

The pack says 25 pieces — does it include a crimp tool or heat gun?

The box contains only the 25 brazed-seam copper fork terminals with heat-shrink insulation; a suitable crimp tool and heat source must be supplied separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.