We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare copper ring terminal with tin finish, half-inch stud hole, 6 AWG crimp barrel

3M

3M M6-12R/SK Ring Terminal 6 AWG 1000 V

SKU CH-BKTV-PZ4Y8

A 6 AWG ring terminal rated for 1,000 V with a 1/2 in stud size, tin-plated copper barrel and CSA/UL certification

  • TypeElectrical Connectors
  • Rated for 1000 V maximum voltage
  • Operates up to 347 Degrees F temperature
  • Tin-finished copper contact resists corrosion
  • Brazed barrel construction adds mechanical strength
  • CSA Certified and UL Listed for safety

6 AWG Ring Terminal for 1/2 in Studs

This 3M M6-12R/SK ring terminal connects 6 AWG copper building wire, fixtures or signs to a half-inch stud. The barrel accepts only 6 AWG conductors and is crimped for a permanent joint. It suits installers who need a single-wire termination at up to 1,000 V.

1,000 V and 347 °F Operational Ceiling

The terminal is rated for a maximum of 1,000 volts and a maximum operating temperature of 347 degrees Fahrenheit. These limits define the highest voltage and heat the copper barrel and tin finish can withstand in service. Exceeding either value risks insulation breakdown or mechanical failure.

Brazed Barrel with Tin-Plated Copper

The barrel is brazed for structural integrity and measures 0.25 in inside diameter by 0.39 in length. Tin-plated copper contacts resist corrosion while the bare finish leaves the conductor exposed for inspection. The 0.81 in tongue width matches standard half-inch stud hardware.

Highlights

  • Rated for 1000 V maximum voltage
  • Operates up to 347 Degrees F temperature
  • Tin-finished copper contact resists corrosion
  • Brazed barrel construction adds mechanical strength
  • CSA Certified and UL Listed for safety

Specifications

Brand3M
TypeElectrical Connectors

Questions about this item

How do I choose the right ring terminal for my wire gauge?

This terminal is built for 6 AWG wire only; the barrel accepts a single wire size so there is no capacity choice to make.

What does the 1,000 V rating mean when the terminal is installed?

It indicates the maximum voltage the connection can safely carry in a properly crimped joint.

What standard governs the 1/2 in stud size and what does it limit?

The 1/2 in stud size sets the bolt diameter the tongue fits; the terminal is CSA Certified and UL Listed for 1,000 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.