We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of 100 red non-insulated copper fork terminals with tin finish #6 stud .25 in barrel .65 in overall 22-18 AWG 600 V 347 F

3M

3M M18-6FBX Scotchlok 22-18 AWG Fork Terminal #6 Stud Pack 100

SKU CH-8ZVN-CSYYS

Non-insulated fork terminals accept 22-18 AWG wire, crimp to #6 studs, and are UL listed and CSA certified

  • TypeDuplex
  • Crimp-ready fork terminal fits #6 studs
  • Non-insulated copper barrel handles 22-18 AWG wire
  • Brazed seam and tin finish resist corrosion
  • UL Listed and CSA Certified for 600 V service
  • Pack of 100 terminals simplifies bulk wiring jobs

Fork terminals for 22-18 AWG wire

These non-insulated block fork terminals accept solid or stranded copper wire from 22 to 18 AWG. The #6 stud size suits common terminal blocks and small-gauge lugs. A pack of 100 pieces supports volume wiring jobs in automotive, industrial or panel work. Tin-plated copper barrels resist corrosion in harsh environments.

Replaces loose ring lugs or solder joints

Crimp termination removes the variability of hand-soldered connections on small wire. The brazed seam prevents the barrel from splitting under vibration. Upgrade when a project demands repeatable gas-tight joints that meet UL and CSA standards. Not suited for insulated barrel requirements or stud sizes other than #6.

Simple crimp install with basic hand tool

Strip wire to the 0.25 in barrel length, insert fully and compress with a standard non-insulated terminal crimper. The 0.65 in overall length fits tight terminal strips. Common errors are under-crimping, which leaves a high-resistance joint, and over-stripping, which exposes conductor beyond the barrel. Verify crimp height with a go/no-go gauge if available.

Highlights

  • Crimp-ready fork terminal fits #6 studs
  • Non-insulated copper barrel handles 22-18 AWG wire
  • Brazed seam and tin finish resist corrosion
  • UL Listed and CSA Certified for 600 V service
  • Pack of 100 terminals simplifies bulk wiring jobs

Specifications

Brand3M
TypeDuplex

Questions about this item

What stud size does the #6 fork terminal fit?

The terminal is built for a #6 stud, so the mounting hole matches that screw size exactly.

Which crimp tool setting works for the 22-18 AWG barrel?

Use a crimper rated for 22-18 AWG non-insulated terminals and compress the 0.25 in barrel fully; the common mistake is using an insulated die that leaves the seam loose.

When should the tin-plated copper fork be replaced?

Replace any terminal showing oxidised tin, a cracked brazed seam, or deformation after exposure above 347 °F or 600 V service limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.