We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten clear polyolefin tubes, six inches long, thin wall, 2:1 shrink ratio

3M

3M FP301 Heat Shrink Tube 3/8 in Clear 6 in 10 Pack

SKU CH-XHTY-KE6P5

Clear thin-wall polyolefin tubing shrinks 2:1 to protect and insulate 12-8 AWG wires, supplied in ten six-inch pieces

  • TypeCable Management & Conduit
  • Thin-wall polyolefin shrinks 2:1 for tight insulation
  • Flame-retardant material resists heat from -67 °F to 275 °F
  • Acid, alkali and solvent resistance protects wires in harsh environments
  • Clear tubing lets you inspect connections before and after shrinking
  • Ten six-inch pieces cover 12 AWG to 8 AWG wire sizes

Heat-shrink tubing for 12–8 AWG wire

This pack contains ten clear pieces of 3M FP301 thin-wall tubing, each six inches long. The material is flexible polyolefin that shrinks at a 2:1 ratio when heated. It covers wire gauges from 12 AWG down to 8 AWG for insulation and strain relief. The tubing is flame retardant and rated for 600 volts dielectric strength.

Acid- and solvent-resistant polyolefin

After shrinking the inside diameter reduces from 0.38 in to 0.19 in with a 0.03 in wall thickness. The tubing resists acids, alkalis and common solvents without an adhesive lining. Individual pieces allow precise lengths for each joint or repair. Minimum shrink temperature is 212 degrees Fahrenheit using a heat gun or similar tool.

Operating range from -67 °F to 275 °F

The wide temperature span suits automotive, marine and industrial environments. Clear colour lets you inspect the underlying connection after installation. The 2:1 ratio limits use to connectors that fit within the original 0.38 in diameter. Buyers needing adhesive-lined seals or higher shrink ratios should select a different product.

Highlights

  • Thin-wall polyolefin shrinks 2:1 for tight insulation
  • Flame-retardant material resists heat from -67 °F to 275 °F
  • Acid, alkali and solvent resistance protects wires in harsh environments
  • Clear tubing lets you inspect connections before and after shrinking
  • Ten six-inch pieces cover 12 AWG to 8 AWG wire sizes

Specifications

Brand3M
TypeCable Management & Conduit

Questions about this item

What shrink ratio does the 2:1 tubing deliver, and what inside diameter does it finish at?

The tubing shrinks 2:1, taking the 0.38 in. inside diameter down to 0.19 in. after heating.

What wire gauge range fits inside the 0.38 in. bore before shrinking?

The tubing accommodates 12 AWG to 8 AWG wire while still at its full 0.38 in. inside diameter.

What minimum temperature starts the shrink, and what tool avoids uneven recovery?

Shrink begins at 212 °F; a heat gun with a diffuser nozzle gives even heat so the tube does not split.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.