3M
3M Dukane Imagepro 8959A Projector Lamp 245W
A ready-to-install 245W UHP lamp module rated for 2,500 normal or 5,000 economy hours
- TypeUHP
- Wattage245W
- Lamp Life2,500 (Normal) - 5,000 (Economy) Hrs.
- Ready-to-install module with housing
- Philips UHP 245W bulb for bright output
- 2,500 hrs normal or 5,000 hrs economy life
- OEM-grade quality under ISO 9001 standards
- Direct replacement for Dukane DT01171
Compatible Dukane Imagepro 8959A Lamp Module
This replacement lamp module fits the Dukane Imagepro 8959A projector and ships as a complete housing with a 245W Philips UHP bulb installed. The unit arrives ready to fit without extra assembly, making it a direct swap for the original DT01171 module. Rated life reaches 2,500 hours in normal mode and 5,000 hours in economy mode.
Suited for standard classroom
Buyers who need a drop-in replacement for the Imagepro 8959A will find this module matches the factory specification. Users who require higher brightness, different wattage or a lamp designed for another projector model should look at other options because this unit is built only for the 8959A series.
Simple housing swap with no tools required
Installation consists of opening the projector lamp door, removing the old module and sliding the new housing into place until it seats firmly. The most common issue is forgetting to reset the lamp-hour counter in the projector menu, which leaves the replacement warning active. Ensure the housing clicks fully home to avoid intermittent ignition.
Highlights
- Ready-to-install module with housing
- Philips UHP 245W bulb for bright output
- 2,500 hrs normal or 5,000 hrs economy life
- OEM-grade quality under ISO 9001 standards
- Direct replacement for Dukane DT01171
Specifications
| Brand | Dukane |
|---|---|
| Type | UHP |
| Wattage | 245W |
| Lamp Life | 2,500 (Normal) - 5,000 (Economy) Hrs. |
Questions about this item
Which Dukane projector models accept the Imagepro 8959A lamp module?
This lamp module is built for the Dukane Imagepro 8959A projector; the manufacturer part number DT01171 confirms direct compatibility with that model.
Can I keep using my existing ceiling mount and cables when I swap in this 245 W UHP lamp?
Yes — the lamp ships as a complete bulb-and-housing assembly, so the projector's mount, power and signal cables remain unchanged.
How do I verify the lamp is performing correctly after installation?
Reset the projector's lamp-hour counter, then confirm brightness and stable ignition; expect roughly 2500 hours in normal mode or 5000 hours in economy mode before replacement is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Honeywell CW45-QBC-0 4-Bay Battery Charger pos system
- No Screen
- 0.7400



