3M
3M 9472LE Adhesive Transfer Tape Acrylic 5.2 mil
Acrylic adhesive transfer tape, 5.2 mil thick, 3/4 in wide by 60 yd long, rated from -40 to 300 °F for general-purpose bonding
- TypeCaulks
- Translucent acrylic tape bonds without visible residue
- 2 mil thickness handles fine-gap assemblies
- 9472LE formulation withstands -40 to 300 °F extremes
- 60 yard continuous roll feeds automated dispensing lines
- General-purpose adhesive suits automotive, electronics and healthcare tasks
3M 9472LE Acrylic Transfer Tape
This 3M 9472LE adhesive transfer tape uses an acrylic formulation for general-purpose bonding. The translucent tape measures 5.2 mil thick and comes in a continuous roll of 60 yards by 3/4 inch. It serves assembly, manufacturing, automotive, electronics and general maintenance tasks.
Indoor and outdoor use up to 300 °F
The tape performs continuously from -40 °F to 300 °F, making it suitable for indoor and outdoor environments. Buyers who need a structural adhesive for heavy loads or a product rated above 300 °F should look at something else. It is not designed for gap filling or sealing applications.
Steady bond through temperature cycles
Under sustained load the acrylic adhesive maintains its grip across the full -40 °F to 300 °F range without softening or becoming brittle. The continuous roll format supports long production runs without splice interruptions. Performance stays consistent during extended exposure rather than only in short bursts.
Highlights
- Translucent acrylic tape bonds without visible residue
- 2 mil thickness handles fine-gap assemblies
- 9472LE formulation withstands -40 to 300 °F extremes
- 60 yard continuous roll feeds automated dispensing lines
- General-purpose adhesive suits automotive, electronics and healthcare tasks
Specifications
| Type | Caulks |
|---|---|
| Brand | 3M |
Questions about this item
What surface preparation is needed before applying the 3M 9472LE tape?
Clean the bonding surfaces so they are dry and free of dust, oil or other contaminants before pressing the tape into place.
Will the acrylic adhesive on the 9472LE tape bond reliably to powder-coated panels?
The acrylic adhesive is designed for general-purpose assembly on metals and many coated surfaces; test a small area first to confirm adhesion on your specific powder coat.
How can I verify the tape is performing correctly after installation?
The bond should hold securely across the rated temperature span of -40 °F to 300 °F without delamination or adhesive bleed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
