3M
3M 78-6969-9925-5 Projector Lamp 220W 2000 Hrs
A 220 W replacement lamp module rated for 2,000 hours of projector use
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 Hrs.
- Genuine 3M replacement lamp ready for quick installation
- 220W UHB bulb delivers bright projection
- 2000-hour rated life supports extended use
- New module includes housing for simple swap
- Manufactured to ISO 9001 quality standards
Genuine 3M Replacement Lamp Module
The 3M 78-6969-9925-5 is a new projector lamp module that ships as a fully assembled bulb and housing, so it installs directly into compatible 3M projectors without extra assembly steps. It uses a 220W UHB bulb rated for 2000 hours of operation.
For 3M Projector Owners Needing a Drop-In Swap
This module suits anyone whose 3M projector accepts the 78-6969-9925-5 part number and who wants a ready-to-fit replacement that meets ISO9001 quality checks. It is not for users whose projector requires a different lamp code or a higher-wattage light source.
220W Output with 2000-Hour Rated Life
At 220 watts the lamp delivers the brightness the original design specifies, and the 2000-hour rating gives a clear replacement interval for typical presentation or classroom use. Heavy daily use will reach that limit sooner, while occasional use extends the practical service period.
Highlights
- Genuine 3M replacement lamp ready for quick installation
- 220W UHB bulb delivers bright projection
- 2000-hour rated life supports extended use
- New module includes housing for simple swap
- Manufactured to ISO 9001 quality standards
Specifications
| Brand | 3M |
|---|---|
| Type | Projector Lamp |
| Wattage | 220W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Which 3M projector models accept the 78-6969-9925-5 lamp module?
This module is built for 3M projectors that specify the 78-6969-9925-5 part number; check your projector’s manual or service label for that exact code before ordering.
Will the 220W UHB lamp run in a projector that originally used a lower-wattage module?
The lamp draws 220W, so the projector must be designed for that power level; using it in a unit rated for a different wattage can cause overheating or startup failure.
How can I confirm the lamp is operating correctly after installation?
Reset the projector’s lamp-hour counter, then verify the on-screen timer starts from zero and the image reaches full brightness without flickering during the first few hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



