3M
3M 4950 Double-Sided Foam Tape 3/4 in 5 yd 45 mil White
White double-sided acrylic foam tape, 45 mil thick, holds from 50 to 200 °F for assembly, automotive, aviation and general repair
- ColorWhite
- Strong hold from 45 mil acrylic foam core
- Performs in heat up to 200 Degrees F
- Stays flexible down to 50 Degrees F
- 3/4 in width suits precise assembly tasks
- Continuous 5 yd roll covers multiple jobs
4950 Series Acrylic Foam Tape
3M 4950 is a double-sided acrylic foam tape supplied in a continuous roll. The white tape measures three-quarter inch wide and five yards long with a thickness of 45 mil. It is designed for assembly and manufacturing tasks across automotive, aviation, construction, electronics and general maintenance applications.
Indoor and outdoor bonding for industrial use
The tape suits installers who need a conformable foam carrier that performs between 50 and 200 degrees Fahrenheit. It is not intended for buyers who require a thinner film tape, a different adhesive chemistry or a product rated beyond the stated temperature range.
Check width, length and temperature rating
Verify that the three-quarter inch width and five yard length match the joint dimensions in your project. Confirm the operating environment stays within the 50 to 200 degree Fahrenheit performance window before ordering.
Highlights
- Strong hold from 45 mil acrylic foam core
- Performs in heat up to 200 Degrees F
- Stays flexible down to 50 Degrees F
- 3/4 in width suits precise assembly tasks
- Continuous 5 yd roll covers multiple jobs
Specifications
| Brand | 3M |
|---|---|
| Color | White |
Questions about this item
What surface temperature range must the mounting area stay within for the 4950 tape to bond properly?
The tape performs between 50 and 200 degrees Fahrenheit, so the surface must remain in that range during and after application.
Will the 3/4-inch width cover the full flange on my existing metal bracket?
The roll is 3/4 inch wide; measure your bracket flange to confirm the tape matches or exceeds that dimension.
How can I verify the acrylic foam has achieved full adhesion after installation?
After the recommended dwell time, the bond should resist peel force and show no visible gaps or liner residue along the 5-yard length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



