3M
3M 4032 Double-Sided Foam Tape 2 in x 5 yd 1/32 in
Double-sided foam tape with acrylic adhesive bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood indoors or outdoors from 50 to 220 °F
- ColorNatural White
- Strong hold on diverse surfaces with acrylic adhesive
- Performs from 50 to 220 Degrees F for indoor and outdoor use
- Bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone, wood
- 2 in wide by 5 yd continuous roll for flexible application
- Trusted 3M brand, Series 4032 foam tape
Double-Sided Foam Tape 4032
3M 4032 is a double-sided acrylic foam tape built for assembly, maintenance and repair across industrial and general-purpose settings. It bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone and wood in a single continuous roll. The natural white colour stays neutral on visible surfaces.
Simple liner removal for quick application
The included liner peels away cleanly so the tape can be pressed into place without special tools. Acrylic adhesive needs firm, even pressure and a clean, dry substrate to reach full strength. Dust, oil or moisture on the surface are the most common causes of a weak bond.
Rated from 50 to 220 degrees F
The tape maintains its holding power across a broad temperature window, making it suitable for indoor and outdoor use. Extreme cold below the minimum or sustained heat above the maximum will degrade adhesion. Very rough or porous surfaces may also reduce contact area and limit performance.
Highlights
- Strong hold on diverse surfaces with acrylic adhesive
- Performs from 50 to 220 Degrees F for indoor and outdoor use
- Bonds ABS, acrylic, concrete, glass, metal, nylon, polycarbonate, stone, wood
- 2 in wide by 5 yd continuous roll for flexible application
- Trusted 3M brand, Series 4032 foam tape
Specifications
| Brand | 3M |
|---|---|
| Color | Natural White |
Questions about this item
How can I confirm the 4032 tape is holding at its rated 220 °F maximum?
After applying the tape to a test piece of the intended material, expose the assembly to the expected service temperature and verify the bond remains intact.
What does the roll include and what must I supply?
The roll supplies the white polyurethane foam with acrylic adhesive on both sides and a release liner; you must provide the substrates and any surface cleaner.
Which width and length should I select for general indoor and outdoor assembly?
Choose the 2-inch by 5-yard roll when you need a continuous length for larger panels or repeated smaller bonds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Magna Visual Data Cards 5 Colors 8.5 x 11 In Pack of 1000
- Transparent



