We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 3M contact cement in a 5-gallon metal pail

3M

3M 21187 Contact Cement 30NF Green 5 gal Pail

SKU CH-TBN6-P3FEZ

Green contact cement bonds porous and non-porous surfaces with a 30-minute working time, heat resistance to 180 °F and low-odour water-based formula

  • TypeCaulks
  • 30-minute working time allows precise alignment
  • Non-flammable water-based formula reduces fire risk
  • Low odour and under 80 g/L VOC for indoor use
  • Heat resistant to 180 °F and water-resistant bond
  • Brush, roll or spray application suits any workflow

Professional adhesive for porous

3M 21187 Contact Cement is a water-based adhesive designed for bonding porous and non-porous materials. The 30NF series formula provides a long bonding range suitable for professional applications. It arrives in a 5 gal pail ready for brush, roll or spray application. The green colour helps visibility during application.

Sustained load performance

The adhesive offers a 30 min working window that allows precise alignment before the bond sets. Heat resistance is rated to 180 Degrees F for durability in warm environments. Maximum application temperature reaches 200 Degrees F during use. Viscosity is capped at 750 cps for consistent flow across large surfaces.

Low odour and nonflammable with low VOC content

This water-based formula is nonflammable and carries a VOC content below 80 g/L for reduced emissions. Low odour improves comfort during extended indoor use. Water-resistant bonds maintain integrity after exposure to moisture. The product ships without state sales restrictions.

Highlights

  • 30-minute working time allows precise alignment
  • Non-flammable water-based formula reduces fire risk
  • Low odour and under 80 g/L VOC for indoor use
  • Heat resistant to 180 °F and water-resistant bond
  • Brush, roll or spray application suits any workflow

Specifications

TypeCaulks
Brand3M

Questions about this item

Does the 30NF contact cement give off strong fumes or heat while curing during a full workday?

The adhesive is low-odour and non-flammable, so it does not produce strong fumes or heat during its 30-minute working time and cure.

What substrates or primers must I already have on hand for the 21187 cement to bond properly?

It bonds porous or non-porous surfaces directly — wood, metal, laminate and many plastics — with no separate primer required.

Will the 30NF series hold up next to older solvent-based adhesives already in the shop when exposed to 180 °F service heat?

Yes, it remains heat-resistant to 180 °F and water-resistant, so it performs alongside legacy adhesives in high-temperature areas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.