3M
3M 13717 Unitized Wheel Silicon Carbide Fine 3in 1/2in 1/4in 12100 RPM
A 3-inch silicon-carbide unitized wheel rated 12,100 RPM for fine finishing on die grinders
- TypeSanders
- Weight0.06
- MaterialSilicon Carbide
- Fine finish with silicon-carbide abrasive
- Soft density rating for controlled material removal
- 12 100 RPM maximum operating speed
- 3 in diameter by 1/2 in face width
- 1/4 in unthreaded hole for quick mounting
Silicon Carbide Unitized Wheel
The 3M 13717 is a non-woven abrasive wheel built for light deburring, blending and finishing on metal surfaces. Its silicon carbide grain and soft density rating deliver a consistent cut without gouging the workpiece. The unitized construction holds its shape through repeated passes on contoured parts.
Fine-Grade Finish Tool
This wheel suits fabricators and maintenance crews who need a uniform satin finish on stainless steel, aluminium or exotic alloys. It is not intended for heavy stock removal, aggressive weld grinding or applications that demand a coarse cutting action. Builders requiring fast material removal should select a harder, coarser abrasive.
12,100 RPM Maximum Speed
The wheel is rated for a maximum operating speed of 12,100 RPM, which determines the grinders and spindles it can safely mount on. Exceeding this limit risks wheel disintegration and operator injury. Always verify that the power tool’s free speed does not surpass the rated value before use.
Highlights
- Fine finish with silicon-carbide abrasive
- Soft density rating for controlled material removal
- 12 100 RPM maximum operating speed
- 3 in diameter by 1/2 in face width
- 1/4 in unthreaded hole for quick mounting
Specifications
| Type | Sanders |
|---|---|
| Weight | 0.06 |
| Brand | 3M |
| Model | 13717 |
| Material | Silicon Carbide |
Questions about this item
What size arbor hole does the 3M 13717 unitized wheel require for mounting?
The wheel has a 1/4 in unthreaded hole that slides onto a matching mandrel or shaft; no threads or quick-change adapter are involved.
How do I install this silicon-carbide wheel on my tool, and what is the common mistake?
Slide the wheel onto the mandrel, secure the retaining washer and nut, then verify the tool runs at or below 12,100 RPM; the frequent error is over-tightening the nut and cracking the non-woven face.
When will the fine-grade silicon-carbide wheel need replacement?
Replace the wheel once the gray non-woven material wears down to the backing or the cutting action noticeably slows; lifespan varies with pressure and workpiece hardness.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
