We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray cylindrical abrasive wheel with center hole

3M

3M 05132 XL-WL Deburring Wheel

SKU CH-CQZ6-N0RA4 MPN 05132

A silicon-carbide convolute wheel for fine deburring and finishing at up to 6,000 RPM

  • TypeSanders
  • Fine-grade silicon-carbide wheel leaves smooth finishes
  • Hard density rating 9 resists loading during extended use
  • XL-WL series construction handles 6 000 RPM maximum speed
  • Open-coat non-woven design reduces heat buildup on workpieces
  • 1-inch centre hole fits standard bench-grinder arbors

Product Type and Purpose

The 3M 05132 is a convolute deburring wheel designed for use with sanders. It uses a non-woven silicon carbide abrasive in an open coating to remove burrs and refine surfaces. The wheel carries a hard density rating of 9 and a fine grade for controlled material removal.

Suitable Users and Limitations

This wheel suits operators running compatible sanders at speeds up to 6 000 RPM who need a 1 inch face width and a 1 inch centre hole. It is not for users requiring a different arbor size, a wider or narrower face, or a softer density for more conformable finishing.

Critical Specification

The maximum operating speed is 6 000 RPM, and the wheel must only be mounted on equipment that does not exceed this limit. Exceeding the rated speed can cause wheel failure and serious injury, so verifying the tool's free speed is the decisive factor before purchase.

Highlights

  • Fine-grade silicon-carbide wheel leaves smooth finishes
  • Hard density rating 9 resists loading during extended use
  • XL-WL series construction handles 6 000 RPM maximum speed
  • Open-coat non-woven design reduces heat buildup on workpieces
  • 1-inch centre hole fits standard bench-grinder arbors

Specifications

TypeSanders
Brand3M
Model05132

Questions about this item

What arbor size does my bench grinder need to fit the 1 in connector on this wheel?

The wheel has a 1 in centre hole, so your grinder must accept a 1 in arbor or come with a matching bushing.

Will the 6 000 RPM maximum speed work safely on a standard 3 600 RPM bench grinder?

Yes, the wheel is rated for up to 6 000 RPM, which is well above the typical 3 600 RPM speed of many bench grinders.

How can I confirm the wheel is cutting correctly once it is mounted?

A properly running wheel produces a steady grey dust trail and removes burrs without loading or glazing on the non‑woven surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.