We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three small puck lights with a remote control

3DZWMAN RGB LED Lamp Kit 3 Pack 24 Key Remote 5V 4W

SKU CH-XCY3-XN8KE

Three USB-powered RGB puck lights with 16 colours, four modes, dimming and a 24-key IR remote, designed for 3D-printed shades

  • Product name3DZWMAN RGB LED Lamp kit x 3
  • featuresLight Emitting Diode
  • weight0.259 kilograms
  • description3DZWMAN, 3PCS, 4 watts, Dimmable, Table Mount, RGB LED Lamp
  • finish3PCS
  • glassPlastic
  • 16 colours and 4 modes let you match any mood
  • 24-key IR remote controls all three lights at once
  • Power-outage memory restores your last colour and mode automatically
  • 5 V USB power runs from a PC, power bank, charger or car port
  • Tool-free snap-in mount fits straight into 3D-printed shades

3-Pack RGB LED Lamp Kit for 3D Printing

This kit supplies three 5 V, 4 W puck lights designed for the MakerWorld MH001 model. Each aluminium-housed module snaps into a printed shade without tools. The set suits makers adding accent lighting to DIY fixtures, cosplay props or desk accessories. A single 24-key IR remote controls all three units together.

Replaces separate LED modules and wiring looms

The kit consolidates colour mixing, dimming and mode memory into one puck per fixture. Upgrading is worthwhile when a project needs synchronised flash or smooth transitions across multiple lights without individual controllers. It is not suited for installations requiring mains voltage, high-output task lighting or weather-sealed outdoor housings.

Tool-free press-fit mounting

Installation takes seconds: press each puck into the recessed pocket of the printed shade and connect the USB cable to any 5 V source such as a PC port, power bank or charger. The only common issue is loose fit if the printed tolerance is oversized; a thin shim or re-print at tighter clearance resolves it.

Highlights

  • 16 colours and 4 modes let you match any mood
  • 24-key IR remote controls all three lights at once
  • Power-outage memory restores your last colour and mode automatically
  • 5 V USB power runs from a PC, power bank, charger or car port
  • Tool-free snap-in mount fits straight into 3D-printed shades

Specifications

Brand3DZWMAN
Model24 key remote control
Product name3DZWMAN RGB LED Lamp kit x 3
featuresLight Emitting Diode
weight0.259 kilograms
description3DZWMAN, 3PCS, 4 watts, Dimmable, Table Mount, RGB LED Lamp kit x 3
Part Number24 key remote control
finish3PCS
glassPlastic
type of bulbLight Emitting Diode
voltage5 volts
electrical usage (watts)4 watts
certificationnot_capable_emitting_rf_energy
installationTable Mount
usageTable Mount
control typeDimmable
styleModern

Questions about this item

How deep is the recess needed for the table-mount puck light?

The kit uses a press-fit recessed design that snaps into a 3D-printed shade; no separate cut-out depth is specified.

What is the correct way to pair the 24-key IR remote with all three lamps?

Point the remote at each lamp and press any key; the built-in synchronisation aligns flash and smooth modes across all units automatically.

When should the aluminium-alloy housing be cleaned to maintain heat dissipation for PLA prints?

Wipe the housing with a dry cloth whenever dust builds up, as the 5 V 4 W design relies on the shell to keep temperatures low during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.