Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939809BTC
In stock
3DZWMAN LED Lamp Kit 001 10-piece 5V dimmable light kit
A 10-piece 5V dimmable LED puck-light kit with three colour temperatures, power-outage colour memory, and tool-free press-fit mounting for 3D-printed shades
- Product name3DZWMAN LED Lamp Kit 001 (10 Piece)
- featuresLight Emitting Diode
- includedLED Lamp 10Pcs
- careMetal
- weight0.68 kilograms
- description3DZWMAN, 10PCS, Metal, 2 watts, Dimmable, Table Mount, LED L
- Three colour temperatures suit any mood or task
- Ten dimming levels give precise brightness control
- Settings survive power loss so no re-setup needed
- Tool-free press-fit install into 3D-printed shades
- 5 V USB power runs from chargers, PCs or power banks
Ten-piece LED kit for 3D-printed lamps
The 3DZWMAN LED Lamp Kit 001 supplies ten dimmable puck lights designed for MakerWorld models such as the Bambu Lab MH001. Each unit draws 2 watts at 5 volts and connects via a 1.5-metre USB Type-A cable. The aluminium housing measures 10.7 by 7.7 by 6.2 centimetres and weighs 0.68 kilograms for the full set. It suits hobbyists who want integrated lighting in their printed fixtures without soldering.
Three colour temperatures with power-outage memory
A single button cycles through yellow, warm white and cool white while ten brightness steps adjust output. The controller stores the last colour choice so a power loss does not reset the setting. Rated at 4 watts total, the smart voltage regulation keeps the housing temperature low during long sessions, helping the lights stay compatible with PLA and PETG shades. Twelve LED beads per puck provide even illumination across the diffuser.
Tool-free press fit into printed shades
Installation is a simple snap: each puck recesses into the matching 3D-printed cavity without screws or adhesives. The 59.5-millimetre diameter and 8.3-millimetre height must match the model’s pocket exactly, so print tolerances matter. The 1.5-metre cable routes to any USB-A source — charger, PC or power bank — but the kit includes no inline switch beyond the puck button. Builders needing more than ten lights or a different voltage will need a separate solution.
Highlights
- Three colour temperatures suit any mood or task
- Ten dimming levels give precise brightness control
- Settings survive power loss so no re-setup needed
- Tool-free press-fit install into 3D-printed shades
- 5 V USB power runs from chargers, PCs or power banks
Specifications
| Brand | 3DZWMAN |
|---|---|
| Model | LED Lamp Kit 001 |
| Product name | 3DZWMAN LED Lamp Kit 001 (10 Piece) |
| features | Light Emitting Diode |
| included | LED Lamp 10Pcs |
| care | Metal |
| weight | 0.68 kilograms |
| description | 3DZWMAN, 10PCS, Metal, 2 watts, Dimmable, Table Mount, LED Lamp Kit 001 (10 Piece), LED Lamp 10Pcs, 10.7 L x 7.7 W x 6.2 H centimeters |
| Part Number | ZWLED-010 |
| finish | 10PCS |
| glass | Plastic |
| size | 10.7 cm x 7.7 cm x 6.2 cm |
| type of bulb | Light Emitting Diode |
| voltage | 5 volts |
| electrical usage (watts) | 2 watts |
| installation | Table Mount |
| usage | Table Mount |
| control type | Dimmable |
| style | Modern |
Questions about this item
Does the 5 V 4 W aluminium puck stay cool enough for PLA prints during all-day use?
The aluminium shell and 5 V 4 W smart voltage control keep housing temperature under control during extended use, making it compatible with PLA and PETG filaments.
What power source must I already have to run the 1.5 m USB Type-A cable?
Any 5 V USB Type-A source — phone charger, tablet adapter, computer port or power bank — will power the kit.
Will the 12 LED beads and 3-colour memory work inside my existing Bambu Lab MH001 3D-printed shade?
Yes, the 12-bead puck snaps tool-free into the MH001 shade and remembers the last colour after a power outage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
