We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PLA filament spool, 1.75 mm diameter, 1 kg weight, sealed bag with desiccant

3D Maker World

3D Maker World PLA (4043D) 1.75mm Green 1Kg Filament

SKU CH-BMRF-SXK6Z

Green PLA filament on a 1 kg spool with 1.75 mm diameter and ±0.05 mm tolerance for consistent extrusion

  • ColorGreen
  • MaterialPLA plastic
  • Diameter1.75 mm
  • FeaturesPremium quality. Made in the USA.
  • Weight2.20 lbs. (1 kg)
  • Tight diameter tolerance of ±0.05 mm ensures smooth extrusion
  • NatureWorks 4043D bio-degradable PLA made in the USA
  • 75 mm diameter fits most desktop 3D printers
  • Extrusion temperature range 160 °C to 220 °C works with heated or unheated beds
  • 1 kg spool sealed with desiccants keeps filament dry

USA-made PLA for desktop printers

This green PLA filament is produced in the United States using NatureWorks 4043D polymer derived from renewable resources. It suits hobbyists and professionals running desktop 3D printers who want a biodegradable material with consistent quality. The 1 kg spool arrives sealed with desiccant to protect against moisture during storage.

1 kg spool with tight diameter control

The filament is held to a 1.75 +/-0.05 mm tolerance to support smooth extrusion and repeatable layer adhesion. One kilogram provides enough material for multiple medium-sized prints or a single large project before a changeover is needed. Very large or continuous production runs will require additional spools to avoid interruption.

Standard spool fits common holders

The spool measures 203 mm in diameter, 76 mm wide, with a 51 mm hub hole that matches many printer mounts. No proprietary adapter is required for typical desktop machines. Printing can be done on heated or non-heated beds using an extrusion range of 160 to 220 degrees Celsius.

Highlights

  • Tight diameter tolerance of ±0.05 mm ensures smooth extrusion
  • NatureWorks 4043D bio-degradable PLA made in the USA
  • 75 mm diameter fits most desktop 3D printers
  • Extrusion temperature range 160 °C to 220 °C works with heated or unheated beds
  • 1 kg spool sealed with desiccants keeps filament dry

Specifications

Brand3DMakerWorld
ModelPLA-1.75-GRE-US
ColorGreen
MaterialPLA plastic
Diameter1.75 mm
FeaturesPremium quality. Made in the USA.
Weight2.20 lbs. (1 kg)

Questions about this item

Will the 1.75 mm diameter with ±0.05 mm tolerance feed reliably through my older Bowden extruder?

The filament is held to a 1.75 mm diameter with a ±0.05 mm tolerance, which matches the spec most Bowden systems expect and reduces the risk of jams or grinding.

How can I confirm the spool is printing correctly once I start a job?

Watch the first layer for even adhesion and consistent extrusion at your chosen temperature between 160 °C and 220 °C; a smooth, uniform bead shows the filament is flowing as intended.

Does the 1 kg spool come sealed with desiccant, or do I need to buy a dry box separately?

Each spool ships sealed in a plastic bag with desiccants included; a separate dry box is only needed if you plan long-term storage after opening.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.