We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75mm PLA filament coil sealed in bag with desiccant

3D Maker World

3D Maker World PLA 4043D 1.75mm Black 1lb

SKU CH-CRQ7-0J5QM

Black PLA filament on a 1 lb spool, 1.75 mm diameter with ±0.05 mm tolerance for consistent extrusion at 160–220 °C

  • ColorBlack
  • MaterialPLA plastic
  • Diameter1.75 mm
  • FeaturesPremium quality. Made in the USA.
  • Weight1lb
  • Made in the USA for reliable sourcing
  • Tight 1.75 mm ± .05 mm tolerance ensures consistent extrusion
  • NatureWorks 4043D bio-degradable PLA reduces environmental impact
  • Prints on heated or non-heated beds for flexible setup
  • 1 lb spool sealed with desiccant keeps filament dry

Black 4043D PLA for desktop printing

This 1.75 mm PLA filament uses NatureWorks 4043D bio‑degradable polymer and is manufactured in the USA to a tight diameter tolerance of ±0.05 mm. The black coil weighs 1 lb (0.45 kg) and arrives sealed with desiccant for moisture protection. It suits hobbyists and makers who want consistent extrusion on common desktop 3D printers.

Extrusion range and bed flexibility

The recommended extrusion window is 160 °C to 220 °C, allowing users to dial in temperature for their specific hot‑end and speed settings. A heated bed is optional because the material adheres well to both heated and non‑heated surfaces. This flexibility reduces setup friction for printers without a heated platform.

Steady output on long prints

Tight diameter control keeps flow stable during extended jobs, limiting the risk of under‑ or over‑extrusion that can appear after many layers. The sealed packaging preserves dryness so the filament feeds cleanly from start to finish. Users who run multi‑hour prints benefit from the consistent cross‑section and low moisture uptake.

Highlights

  • Made in the USA for reliable sourcing
  • Tight 1.75 mm ± .05 mm tolerance ensures consistent extrusion
  • NatureWorks 4043D bio-degradable PLA reduces environmental impact
  • Prints on heated or non-heated beds for flexible setup
  • 1 lb spool sealed with desiccant keeps filament dry

Specifications

Brand3DMakerWorld
ModelABS1.75-BLA-1LB
ColorBlack
MaterialPLA plastic
Diameter1.75 mm
FeaturesPremium quality. Made in the USA.
Weight1lb

Questions about this item

How do I load the 1.75 mm PLA 4043D filament and what temperature mistake should I avoid?

Feed the filament into the extruder, set the hot end between 160 and 220 °C, and do not exceed 220 °C or the material may degrade and clog the nozzle.

What upkeep will this 1 lb spool of NatureWorks 4043D PLA require over time?

Keep the coil sealed with its desiccant when not printing; PLA absorbs moisture, so dry storage prevents brittle filament and poor layer adhesion later.

What is the first limitation I will hit during a long print with this ±0.05 mm tolerance filament?

Diameter variation of ±0.05 mm can cause inconsistent extrusion on extended runs, leading to under-extrusion or surface artefacts before the spool runs out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.