We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten square amber Kapton sheets with release liners

3D Maker World

3D Maker World 0.06mm 10x10in Kapton Tape 10 Pack 3d printers accessory

SKU CH-DA1J-D4DD3

Ten precisely cut 254 mm polyimide sheets withstand 280 °C and give reliable bed adhesion for ABS, PLA and other thermoplastics

  • Precise 254×254 mm sheets fit many printer beds
  • Withstands 280 °C for reliable high-temp printing
  • Silicone adhesive bonds ABS, PLA and polycarbonate firmly
  • Release liner enables bubble-free application every time
  • Ten sheets per pack keep the build surface ready

0.06 mm Kapton Tape 10 Pack

This pack supplies ten precisely die-cut Kapton polyimide sheets measuring 254 by 254 mm. Each sheet is 0.06 mm thick with a silicone adhesive layer and a release liner for clean handling. The material withstands temperatures up to 280 °C. It is intended for 3D printer build surfaces.

Suits FDM printers needing heat-resistant bed sheets

Makers printing ABS, PLA, PVA or polycarbonate gain reliable first-layer adhesion. The release liner simplifies bubble-free application on glass beds. Users requiring continuous rolls or widths other than 10 inches should look elsewhere. The pack contains only ten individual squares.

Withstands 280 °C for high-temp filaments

The 280 °C (536 °F) rating determines whether the tape survives the bed temperatures demanded by materials such as polycarbonate. Lower-rated sheets may degrade or lift during long prints. Verify your printer's maximum bed temperature against this limit before purchasing.

Highlights

  • Precise 254×254 mm sheets fit many printer beds
  • Withstands 280 °C for reliable high-temp printing
  • Silicone adhesive bonds ABS, PLA and polycarbonate firmly
  • Release liner enables bubble-free application every time
  • Ten sheets per pack keep the build surface ready

Specifications

No published specifications for this item yet.

Questions about this item

Should I choose the 10-pack of 10x10in sheets or a different size?

This listing supplies ten 10x10in sheets, each 0.06mm thick with a release liner, giving you multiple fresh build surfaces for repeated prints.

What does the 280°C rating mean when the tape is on my heated bed?

The polyimide film and silicone adhesive withstand continuous bed temperatures up to 280°C, so ABS, PLA, polycarbonate and other thermoplastics stay adhered without the tape degrading.

How does the silicone adhesive perform on a glass bed at high heat?

The 0.03mm silicone adhesive layer bonds firmly to glass at printing temperatures up to 280°C and releases cleanly with the included liner, especially when applied with a Windex layer to remove bubbles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.