We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 2.5m RGB LED extension cables with 4-pin connectors, PVC jacket, tin-plated copper wires

2pcs 2.5m 8.2ft RGB LED Strip Extension Cable 4 Pin

SKU CH-DNDM-DT756

Two 2.5 m extension cables with pre-soldered 4-pin connectors to link RGB LED strips or a controller at up to 24 V and 72 W

  • Sports Team2 Piece
  • Commercial/ResidentialConnecting and extending RGB LED strip lights, Low Voltage
  • Extends RGB strips up to 8.2 ft with 2.5 m cable length
  • Plug-and-play female connectors eliminate soldering for quick installation
  • Tin-plated copper wires resist oxidation for longer service life
  • Handles DC 0–24 V input up to 72 W max power
  • Compatible with 5050, 3528 and 2835 RGB LED strips

RGB LED Strip Extension Cable

Two 2.5 metre cables with pre-soldered female connectors let you link 5050, 3528 or 2835 RGB strips to a controller or to each other. The plug-and-play design needs no soldering and works with DC inputs from 0 to 24 volts up to 72 watts.

Pure Copper Conductors with PVC Insulation

Tin-plated copper wires resist oxidation for longer service life, while the PVC outer layer protects the four conductors during routing. Four male-to-male 4-pin plugs are included for additional connection options.

Extends Reach Between Strips and Controllers

Ideal when the stock lead is too short to reach the desired mounting spot or when joining multiple strips in separate locations. Not suited for single-colour or addressable strips that use different pinouts or voltage levels.

Highlights

  • Extends RGB strips up to 8.2 ft with 2.5 m cable length
  • Plug-and-play female connectors eliminate soldering for quick installation
  • Tin-plated copper wires resist oxidation for longer service life
  • Handles DC 0–24 V input up to 72 W max power
  • Compatible with 5050, 3528 and 2835 RGB LED strips

Specifications

Sports Team2 Piece
Commercial/ResidentialConnecting and extending RGB LED strip lights, Low Voltage

Questions about this item

What voltage and wattage does the 4-pin extension cable support?

The cable is rated for DC 0V to 24V input and handles up to 72W maximum load.

What length and wire gauge does each extension cable have?

Each of the two cables measures 2.5m or 8.2ft and uses pure copper conductors with tin plating inside PVC insulation.

How do I connect the cable without soldering and what alignment is required?

Plug the pre-soldered female ends into the strip or controller, making sure the arrows on both connectors point in the same direction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.