We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver-gray in-ear headphones with aluminum chambers and inline remote

1MORE

1MORE Quad Driver E1010 In-Ear Headphones Silver/Gray

SKU CH-VKC6-H5DP0

Four drivers and a diamond-like-carbon driver deliver high-resolution audio up to 40,000 Hz with a 3.5 mm connector and in-line microphone

  • TypeIn-Ear
  • ColorBlack
  • Connector3.5mm
  • Ear CouplingEarbud
  • Noise CancellingPassive
  • CompatibilityUniversal
  • Four drivers create spacious, high-resolution sound
  • Diamond-like-carbon driver plus three balanced armatures extend frequency to 40,000 Hz
  • 45° oblique ear fittings give secure fit and passive noise isolation
  • In-line remote and microphone handle calls, tracks and volume
  • Aluminum chambers with tungsten accents weigh 18.5 g and include 9 ear tips, adapters and case

Quad-driver in-ear headphones

The 1MORE Quad Driver E1010 uses four drivers per earpiece, combining a diamond-like-carbon driver with three balanced armatures to cover highs, mids and bass. A 45° oblique nozzle angle matches the ear canal for secure fit and passive isolation. The aluminum sound chambers weigh 18.5 g and include an in-line microphone and remote for calls and playback control. A 1.25 m cable terminates in a 3.5 mm plug for universal compatibility.

Hi-Res frequency extension to 40,000 Hz

The 20-40,000 Hz range reaches beyond standard audio bandwidth, capturing transient detail that creates a sense of realism. Sensitivity of 99 dB and 32 impedance allow adequate volume from smartphones, tablets and laptops without a dedicated amplifier. Buyers who need wireless convenience or active noise cancellation should consider other models, as this design relies on a wired connection and passive isolation only.

3.5 mm wired connection with in-line controls

The single fixed 3.5 mm plug carries both audio and the control-box signals, so devices without a headphone jack cannot use these headphones without a separate adapter not supplied in the box. The four-driver acoustic architecture and aluminum chambers are tuned by Grammy-winning engineer Luca Bignardi for a warm, spacious signature. Nine pairs of ear tips and a travel case are included for fit customization and protection.

Highlights

  • Four drivers create spacious, high-resolution sound
  • Diamond-like-carbon driver plus three balanced armatures extend frequency to 40,000 Hz
  • 45° oblique ear fittings give secure fit and passive noise isolation
  • In-line remote and microphone handle calls, tracks and volume
  • Aluminum chambers with tungsten accents weigh 18.5 g and include 9 ear tips, adapters and case

Specifications

Brand1MORE
SeriesClassic
ModelE1010
TypeIn-Ear
ColorBlack
Connector3.5mm
Ear CouplingEarbud
Noise CancellingPassive
CompatibilityUniversal

Questions about this item

What source device do I need to plug the 3.5 mm connector into?

Any device with a standard 3.5 mm headphone jack — smartphone, tablet, laptop or desktop — will drive the 32 Ω load without extra hardware.

Will the 3.5 mm plug and in-line remote work with my older phone or laptop that has separate mic and headphone sockets?

The single 3.5 mm TRRS plug carries both audio and microphone; you will need a TRRS-to-dual-TRRS splitter adapter (not included) for separate sockets.

How can I verify the earphones are reproducing the full 20–40,000 Hz range after setup?

Play a logarithmic frequency sweep from 20 Hz to 40 kHz; you should hear continuous output down to the low bass and up to the highest audible harmonics without drop-outs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.