We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
18 Sound recone kit in rectangular cardboard box

18 Sound

18 Sound Recone Kit R15MB1000RKIT for 15MB1000

SKU CH-BER9-C2FDK

Recone kit restores 15MB1000 driver performance with factory-matched components

  • Recone kit restores 15MB1000 driver performance
  • Genuine 18 Sound parts ensure exact fit
  • Manufactured in the United States for quality control
  • Complete kit simplifies driver repair process
  • Package dimensions 15.0" L x 6.0" W x 6.0" H

Recone Kit for 15MB1000 Drivers

The 18 Sound R15MB1000RKIT is a genuine recone kit built for the 15MB1000 transducer. It supplies the diaphragm, voice coil and suspension parts needed to restore original performance. Professional audio technicians and speaker cabinet builders use it to extend driver service life.

Installation and Common Issues

Installation requires removing the old cone assembly, cleaning the gap thoroughly and centring the new voice coil with shims before the adhesive cures. Misalignment causes rubbing, while excess glue can restrict coil movement. Patience and a clean workspace prevent the most frequent faults.

Capacity and Headroom

The kit returns the 15MB1000 to its factory power handling and sensitivity, letting the driver handle full-rated programme levels again. It does not increase the transducer’s original limits or change its frequency response. Cabinets needing higher output or different tuning require a different driver model.

Highlights

  • Recone kit restores 15MB1000 driver performance
  • Genuine 18 Sound parts ensure exact fit
  • Manufactured in the United States for quality control
  • Complete kit simplifies driver repair process
  • Package dimensions 15.0" L x 6.0" W x 6.0" H

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the R15MB1000RKIT is working correctly after installation?

Reinstall the driver into the 15MB1000 cabinet, apply a low-level test signal and measure the impedance curve; it should match the original 15MB1000 specification.

What components are included in the R15MB1000RKIT package and what must be sourced separately?

The kit supplies the replacement cone, voice coil, spider and gaskets for the 15MB1000; adhesive, shims and recone tools are not included.

Which recone kit version matches my 15MB1000 driver?

The R15MB1000RKIT is the single model built for the 15MB1000; the UPC 731717959519 confirms the exact match.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.