We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 16 mm 12-point deep sockets 1/2-inch drive 3.1 inches polished chrome vanadium steel

16mm 12-Point Deep Socket 1/2-Inch Drive 3.1" 2PCS

SKU CH-MCCK-TRG1Z

Two 16 mm, 12-point deep sockets with 1/2-inch drive and 3.1-inch length in heat-treated chrome vanadium steel

  • FeaturesChrome Vanadium Steel, Polished, 2Pcs 16mm, 3.1 inches, 2
  • Length3.1 inches
  • 12-point design grips fasteners securely
  • 16 mm metric size fits common bolts
  • 1 inch deep reach accesses recessed nuts
  • Heat-treated CR-V steel resists high torque
  • Two-piece set provides a spare socket

Two-piece 16 mm deep socket set

This set contains two 16 mm deep sockets built from heat-treated chrome vanadium steel with a full-polish chrome finish. Each socket uses a 1/2-inch drive and a 12-point internal profile measuring 78 mm overall length. The size is stamped on the body for quick identification and a pinhole base accepts a locking pin for secure retention under high torque.

Mechanics needing duplicate 16 mm deep sockets

The pair suits technicians who want a spare 16 mm deep socket on the rail or who run two impact guns on the same job. Buyers who need a range of metric sizes or a different drive size should look at a full socket set instead.

12-point 16 mm opening on 1/2-inch drive

The 12-point configuration engages the fastener at twice the angular increments of a 6-point design, allowing engagement in confined areas where swing room is limited. This single specification decides whether the socket matches the fastener and drive tools already in use.

Highlights

  • 12-point design grips fasteners securely
  • 16 mm metric size fits common bolts
  • 1 inch deep reach accesses recessed nuts
  • Heat-treated CR-V steel resists high torque
  • Two-piece set provides a spare socket

Specifications

BrandFOCMKEAS
FeaturesChrome Vanadium Steel, Polished, 2Pcs 16mm, 3.1 inches, 2
Length3.1 inches

Questions about this item

What drive size does the 16 mm deep socket require?

The socket uses a 1/2-inch square drive, so a matching 1/2-inch ratchet or breaker bar is needed.

How do you secure the socket to the drive tool?

Insert the drive tool into the socket, then fit a locking pin through the pinhole in the socket base to prevent it from coming off under high torque.

What wear items should be checked on these sockets over time?

Inspect the 12-point WaveDrive profile for rounding and the chrome plating for corrosion; replace the socket if the drive square or fastener walls show visible wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.