We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

12V 4A Power Supply Adapter 48W 5.5x2.5mm Jack 4.9FT

SKU CH-WDFB-FPD8P

Converts 100–240V AC to 12V DC at up to 4A with a 5.5×2.5mm plug and 4.9ft cable for LED strips, cameras and routers

  • Featuresfast charging
  • FitmentMonitors, LED Strip Light, NOT compatible with Phone
  • Universal 100-240V AC input powers devices worldwide
  • 48W maximum output runs 12V electronics reliably
  • 9FT cable length gives flexible placement options
  • 5x2.5mm jack fits common LED strips and cameras
  • Built-in protection guards against over-voltage and short circuits

12V 4A Power Adapter

This 48 W adapter converts 100–240 V AC at 50/60 Hz into a regulated 12 V DC output rated at 4 A maximum. It is intended for monitors, LED strip lighting, 3D printers, CCTV cameras and similar 12 V equipment that draws up to 4000 mA.

5.5 × 2.5 mm DC Jack Compatibility

The barrel connector fits both 5.5 × 2.5 mm and 5.5 × 2.1 mm ports with centre-positive polarity. Devices requiring a different jack size, reverse polarity or USB-C Power Delivery cannot be powered by this unit.

48 W Maximum Output Headroom

The supply comfortably runs LED strips such as WS2812B or WS2811, routers, switches, speakers and security cameras that stay within the 48 W limit. It will not support loads exceeding 4 A, nor is it suitable for charging phones, laptops or tablets.

Highlights

  • Universal 100-240V AC input powers devices worldwide
  • 48W maximum output runs 12V electronics reliably
  • 9FT cable length gives flexible placement options
  • 5x2.5mm jack fits common LED strips and cameras
  • Built-in protection guards against over-voltage and short circuits

Specifications

BrandaFe Power
Featuresfast charging
FitmentMonitors, LED Strip Light, NOT compatible with Phone

Questions about this item

Which output current should I choose for my device?

Select any device that draws up to 4A at 12V; the adapter will deliver exactly what the load requires up to the 48W maximum.

What does the 48W rating mean when the adapter is powering my equipment?

It is the maximum continuous power the unit can supply; your device will only draw its needed watts, so a 24W load runs normally while the adapter stays within its limit.

What does the 5.5x2.5mm jack cap in practice?

The jack fits both 5.5x2.5mm and 5.5x2.1mm sockets with centre-positive polarity, limiting use to devices that accept that connector and voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.