We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
12-inch galvanised steel turntable bearing with pre-drilled holes

12" Lazy Susan Turntable Bearing Plate 1000lbs

SKU CH-5Z72-1TR8W

A 12-inch galvanised-steel turntable bearing with 360-degree ball-bearing rotation, pre-drilled holes and a 1000lbs load rating for DIY serving trays, cabinets or displays

  • Supports up to 1000lbs for heavy-duty rotating applications
  • 360° smooth rotation on stainless steel ball bearings for quiet operation
  • Pre-punched screw holes on both rings enable quick DIY installation
  • Fits turntable diameters from 15 to 30 inches for versatile sizing
  • Galvanised steel construction resists rust and ensures long-lasting durability

12-Inch 1000lbs Turntable Bearing

This 12-inch galvanised steel bearing plate supports loads up to 1000lbs and is designed for DIY rotating platforms. It suits kitchen cabinets, serving trays, display stands and workshop projects where smooth 360° movement is required.

Installation Uses Pre-Punched Holes

The inner and outer rings have pre-punched screw holes so the bearing fastens directly to the mounting surface with basic tools. Ensure screws are tightened evenly; uneven torque can bind the stainless steel ball bearings and cause rough rotation.

Check Diameter And Thickness Before Ordering

The bearing fits turntables with diameters between 15 and 30 inches and measures 5/16 inch thick. Verify your top plate matches this range and that the mounting surface is flat; warped or undersized surfaces will prevent smooth operation.

Highlights

  • Supports up to 1000lbs for heavy-duty rotating applications
  • 360° smooth rotation on stainless steel ball bearings for quiet operation
  • Pre-punched screw holes on both rings enable quick DIY installation
  • Fits turntable diameters from 15 to 30 inches for versatile sizing
  • Galvanised steel construction resists rust and ensures long-lasting durability

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 360° rotation is smooth after mounting the 12" bearing plate?

Spin the assembled turntable by hand; it should revolve freely on the stainless steel ball bearings without binding or noise, indicating the raceway is correctly seated.

What comes in the box and what must I supply for installation?

The package includes one 12" round galvanised steel bearing plate 5/16" thick with pre-punched screw holes; you provide the mounting screws and the top surface (15–30" diameter) to attach.

Which load rating should I trust — 750 lbs or 1000 lbs — for a heavy serving tray?

The manufacturer highlights state the plate can safely handle up to 1000 lbs, so use that figure for capacity planning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.