We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with gold connectors, six feet long, PVC jacket

LORDWORLD

LORDWORLD JDC42 DisplayPort cable 6ft 4K 60Hz 21.6Gbps v1.2 HBR2

SKU CH-T27T-MZJ4Z

A 1.8 m male-to-male DisplayPort cable carries 4K video at 60 Hz and 21.6 Gbps with gold-plated latched connectors and triple shielding

  • Transmits 4K at 60 Hz for sharp video
  • 6 Gbps HBR2 bandwidth handles high-resolution signals
  • Gold-plated connectors and copper OFC conductors ensure reliable conductivity
  • Triple shielding blocks interference for stable picture and sound
  • Latched connectors prevent accidental disconnection during use

6 ft 4K 60 Hz DisplayPort cable

The LORDWORLD JDC42 is a male-to-male DisplayPort cable built to the v1.2 specification with HBR2 bandwidth of 21.6 Gbps. It carries audio and video up to 4K at 60 Hz and 3D formats over a 6 ft (1.8 m) length. Gold-plated connectors, copper OFC conductors and triple shielding protect signal integrity. Latched plugs resist accidental disconnection.

Suits 4K 60 Hz setups.

This cable matches monitors, projectors or HDTVs that run at 4K 60 Hz or lower and accept DisplayPort v1.2, v1.1 or v1.0 signals. It is not for users who require the bandwidth of later DisplayPort versions for 4K at higher refresh rates or for 8K resolutions. Backward compatibility covers older ports without extra adapters.

Deciding spec: 21.6 Gbps HBR2 bandwidth

The single figure that determines fit is the 21.6 Gbps HBR2 data rate certified under DisplayPort v1.2. If your source and display need more throughput — for example 4K above 60 Hz — this cable will not deliver the required signal. For 4K 60 Hz and 3D content within the v1.2 envelope it provides a stable, shielded link.

Highlights

  • Transmits 4K at 60 Hz for sharp video
  • 6 Gbps HBR2 bandwidth handles high-resolution signals
  • Gold-plated connectors and copper OFC conductors ensure reliable conductivity
  • Triple shielding blocks interference for stable picture and sound
  • Latched connectors prevent accidental disconnection during use

Specifications

BrandLORDWORLD

Questions about this item

Will the 6 ft DisplayPort cable reach my monitor if the PC sits on the floor?

The cable is 1.8 m (6 ft) long, so measure the straight-line distance from your PC's DisplayPort socket to the monitor's input; allow extra slack for routing around furniture.

How do I release the latched connectors without damaging the port?

Squeeze the small release tabs on each connector before pulling; yanking the cable body can bend the port pins or snap the latch.

When should I replace this cable if the picture starts to flicker?

Flickering or signal drop-outs usually mean the copper OFC conductors or triple shielding have been kinked; swap the cable once re-seating both ends no longer fixes the issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.