Lumapro
Lumapro 3EHL3 Miniature Lamp 28W S11 6.2V light kit
A 6.2 V, 28 W incandescent lamp with an S11 glass envelope and BA15d base delivering 402 lumens at 2300 K for 400 hours
- 28 watts delivers bright 402 lumen output for clear illumination
- Warm 2300 K colour temperature creates inviting indoor atmosphere
- Double-contact bayonet base ensures secure fit in compatible fixtures
- 400-hour rated life reduces replacement frequency in daily use
- Compact 2 3/8 inch length suits space-constrained applications
Miniature Lamp 28W S11 6.2V
The Lumapro 3EHL3 is a clear incandescent miniature lamp rated at 27.9 watts and 6.2 volts AC. It uses an S11 bulb shape with a double contact bayonet base (BA15d) and produces 402 lumens of white light at 2300K. The glass envelope measures 2 3/8 inches in overall length. It is designed for indoor use only and carries trade number 1724.
Thermal Noise Power Draw
As an incandescent source, the lamp converts most input power into heat rather than light during normal operation. The glass housing becomes hot to the touch and the unit operates silently with no fan or ballast noise. Power draw remains steady at the rated 27.9 watts when supplied with the correct 6.2 volt AC source. Dimming is not supported by this model.
Sustained Load Behaviour
The rated life is 400 hours of continuous operation before expected filament failure. Light output and colour temperature remain stable throughout the rated lifespan until end of life. The lamp is not shatter-resistant and is not approved for enclosed fixtures where heat buildup could shorten the 400 hour rating. No three-way switching capability is provided.
Highlights
- 28 watts delivers bright 402 lumen output for clear illumination
- Warm 2300 K colour temperature creates inviting indoor atmosphere
- Double-contact bayonet base ensures secure fit in compatible fixtures
- 400-hour rated life reduces replacement frequency in daily use
- Compact 2 3/8 inch length suits space-constrained applications
Specifications
| Brand | LUMAPRO |
|---|
Questions about this item
How do I install the Lumapro 3EHL3 lamp into a BA15d socket without damaging the contacts?
Align the pins on the double-contact bayonet base with the socket slots, push gently until seated, then twist clockwise to lock; forcing it straight in bends the pins.
When should I replace this 28W S11 lamp based on its rated life?
The rated life is 400 hours; plan replacement once the lamp reaches that point or if light output drops noticeably before then.
What is the first limitation I will hit if I run this 6.2V incandescent lamp continuously in an enclosed fixture?
The lamp is not rated for enclosed fixtures; heat buildup will likely cause early filament failure before the 400-hour rating is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



