We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten SFP+ transceiver modules with LC connectors in a pack

ZyXEL

ZyXEL SFP10G-SR-E 10GBase-SR SFP+ 850nm 300m DOM 10 Pack

SKU CH-6NT2-NDN07 MPN SFP10G-SR-E

Ten 10GBase-SR SFP+ transceivers with LC connectors for 850 nm links up to 300 m, MSA-compliant with DOM monitoring

  • Device TypeTransceiver
  • 10-pack simplifies multi-port deployments
  • 300 m reach covers typical data-centre links
  • 850 nm wavelength suits multimode fibre runs
  • DOM support enables real-time link monitoring
  • MSA compliance ensures broad switch compatibility

Ten-pack 10GBase-SR transceiver

The ZyXEL SFP10G-SR-E is a 10-pack of 10GBase-SR SFP+ transceiver modules operating at 850nm with a 300m reach. Each module uses an LC connector and supports Digital Optical Monitoring. They are MSA compliant and built for use with compatible ZyXEL switches. This bundle suits network administrators deploying short-range 10 Gigabit links across multiple ports.

Replaces older 1G SFP modules

These transceivers upgrade 1G SFP uplinks to 10G speeds on supported ZyXEL hardware such as the XGS4600 series and XS3800-28. The jump is worthwhile when aggregate throughput demands exceed 1G capacity on fibre runs up to 300m. They do not suit single-mode fibre paths or distances beyond the rated reach. Buyers needing longer range or different wavelengths should select alternate modules.

Hot-pluggable SFP+ installation

Installation is a hot-plug process into any compatible SFP+ cage; no tools or configuration are required beyond seating the module until it clicks. The LC duplex patch cord must match the 850nm multimode fibre type. Common issues include inserting the module upside down, using single-mode patch cords, or exceeding the 300m distance limit, all of which cause link failures.

Highlights

  • 10-pack simplifies multi-port deployments
  • 300 m reach covers typical data-centre links
  • 850 nm wavelength suits multimode fibre runs
  • DOM support enables real-time link monitoring
  • MSA compliance ensures broad switch compatibility

Specifications

BrandZyxel
ModelSFP10G-SR-E
Part NumberSFP10G-SR-E
Device TypeTransceiver
Shipping weight0.91 kg
Package size246 × 104 × 41 mm

Questions about this item

Which connector type does the SFP10G-SR-E use for fibre patch cables?

The module uses an LC duplex connector for multimode fibre patch cables.

What switch port speed must be configured before inserting the SFP10G-SR-E?

Set the switch port to 10 Gbps and ensure the SFP+ cage is clean before inserting the transceiver.

How can I tell when a transceiver in the 10-pack needs replacement?

Monitor the DOM read-outs for transmitted power, received power, bias current, supply voltage and temperature; replace the module if any value drifts outside the normal range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.