Zyvpee
Zyvpee RH31M-4DK.2C.1R AC Axial Fan 3-230V/400V 50/60Hz IP44 THCL155
Three-phase AC axial fan runs at 1390/1570 RPM with 0.14/0.21 kW power and IP44 protection
- TypeAC Axial fan
- RPM>7000 RPM
- Air Flow>80 CFM
- Color2-Tone
- LEDNon-LED
- FeaturesAC Axial Fan
- Runs on dual-voltage three-phase power for flexible installation
- 50 Hz or 60 Hz operation matches regional grid standards
- IP44 rating protects against splashing water and solid particles
- Thermal class 155 insulation withstands high operating temperatures
- Delivers over 80 CFM airflow at speeds above 7000 RPM
Industrial Three-Phase Axial Fan
The Zyvpee RH31M-4DK.2C.1R is an AC axial fan built for industrial cooling duties. It operates on three-phase 230V or 400V supplies at 50Hz or 60Hz. The unit carries an IP44 rating and a THCL155 thermal classification for demanding environments.
Voltage And Frequency Limits
The fan accepts dual-voltage three-phase input at 230V or 400V across 50Hz and 60Hz mains. Power draw shifts between 0.14kW and 0.21kW depending on the connected voltage and frequency. Power factor ranges from 0.6 to 0.8 under those same conditions.
Airflow Capacity And Speed Range
The impeller delivers more than 80 CFM of airflow for heat removal tasks. Rotational speed spans 1390 RPM at 50Hz up to 1570 RPM at 60Hz, with a maximum capability exceeding 7000 RPM. The THCL155 insulation class provides thermal headroom for sustained high-speed operation.
Highlights
- Runs on dual-voltage three-phase power for flexible installation
- 50 Hz or 60 Hz operation matches regional grid standards
- IP44 rating protects against splashing water and solid particles
- Thermal class 155 insulation withstands high operating temperatures
- Delivers over 80 CFM airflow at speeds above 7000 RPM
Specifications
| Series | RH31M-4DK.2C.1R |
|---|---|
| Model | RH31M-4DK.2C.1R |
| Type | AC Axial fan |
| RPM | >7000 RPM |
| Air Flow | >80 CFM |
| Color | 2-Tone |
| LED | Non-LED |
| Features | AC Axial Fan |
Questions about this item
Should I select the 230 V or 400 V winding for my three-phase supply?
The fan is rated for 3-230 V/400 V at 50/60 Hz; choose the winding that matches your mains voltage exactly.
What airflow can I expect once the fan is installed in a duct?
The manufacturer lists air flow above 80 CFM at the rated speeds of 1390/1570 RPM.
Does the IP44 rating limit the environments where this axial fan can run?
IP44 protects against solid objects over 1 mm and water splashes from any direction, suitable for typical industrial ventilation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
