Zyvpee
Zyvpee R2D220-AB02-10 220mm 400Vac 50/60Hz 0.18/0.2A IP44 Class B 4 wires Black ac centrifugal blower
220 mm AC centrifugal blower rated 400 Vac at 50/60 Hz with IP44 protection and four-wire connection
- TypeCPU Cooler Fan
- Fan Size220mm
- ColorBlack
- LEDNon-LED
- 220 mm diameter moves more air through tight enclosures
- 400 V AC input suits industrial three-phase supplies
- Dual 50/60 Hz rating works worldwide without rewiring
- IP44 splash protection keeps dust and moisture out
- Four-wire connection enables speed control and monitoring
Zyvpee 220 mm AC Centrifugal Blower
This Zyvpee blower is a 220 mm AC centrifugal fan built for equipment that needs directed airflow in a compact housing. It suits engineers and maintenance teams who need a direct replacement for existing 400 Vac ventilation units. Buyers who require a DC-powered or PWM-controlled fan cannot use this model.
400 Vac 50/60 Hz 0.18/0.2 A Rating
The motor runs on 400 Vac at 50 Hz or 60 Hz and draws 0.18 A at 50 Hz and 0.2 A at 60 Hz. That capacity covers many industrial cabinet and HVAC duties where single-phase 400 Vac supply is standard. It runs out of headroom if the application demands variable speed control or a lower voltage supply.
IP44 Class B Four-Wire Integration
An IP44 rating protects the windings against splashing water and solid particles larger than 1 mm, while Class B insulation handles the thermal load. The four-wire lead simplifies wiring into existing terminal blocks or contactor circuits. The black finish and non-LED design keep the unit visually neutral inside enclosures.
Highlights
- 220 mm diameter moves more air through tight enclosures
- 400 V AC input suits industrial three-phase supplies
- Dual 50/60 Hz rating works worldwide without rewiring
- IP44 splash protection keeps dust and moisture out
- Four-wire connection enables speed control and monitoring
Specifications
| Series | R2D220-AB02-10 |
|---|---|
| Model | R2D220-AB02-10 |
| Type | CPU Cooler Fan |
| Fan Size | 220mm |
| Color | Black |
| LED | Non-LED |
Questions about this item
Will the 220 mm 400 Vac blower fit the mounting pattern on my existing ebmpapst R2D220 housing?
The unit matches the R2D220-AB02-10 series dimensions and four-wire lead layout, so it aligns with the original mounting holes and electrical connector.
How can I confirm the blower is running correctly once wired?
At 50 Hz the motor draws 0.18 A and at 60 Hz it draws 0.2 A; measure current on the supply leads to verify normal operation.
Does the package include a mating connector or capacitor, or must I source them separately?
Only the blower with its four flying leads is supplied; a compatible plug and any required run capacitor are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
