Zyvpee
Zyvpee M2D068-BF 400~480VAC 3 Phase 43/54W IP44 160mm axial cooler
AC axial fan runs on 400~480 V three-phase power at 50/60 Hz, draws 43/54 W, and fits a 160 mm frame with IP44 protection
- TypeAC axial fan
- Bearing TypeBall
- Power Connector4 Wires
- ColorBlack
- LEDNon-LED
- FeaturesAC Axial Fan
- Three-phase 400-480VAC supply suits industrial mains
- Dual-frequency 50/60Hz operation matches global grids
- IP44 rating protects against splashing water
- Class F insulation handles elevated temperatures
- Ball-bearing motor reduces friction for longer service
Zyvpee M2D068-BF Industrial Axial Cooler
This AC axial fan operates on three-phase 400 to 480 VAC at 50 or 60 Hz, drawing 43 or 54 watts. It is built for industrial HVAC and machinery cooling where a 160 mm frame fits the mounting pattern. The IP44 rating and Class F insulation suit dusty or damp environments. Ball bearings support continuous duty cycles.
Upgrade From Smaller Or Single Phase Fans
The unit replaces lower airflow axial fans that cannot meet the same static pressure or voltage requirement. The jump is worth it when the existing cutout accepts 160 mm dimensions and the supply is three-phase 400 to 480 VAC. It is not for builders who need a different frame size, a single-phase supply, or a lower voltage range.
Four Wire Ball Bearing Installation
Four lead wires connect directly to the three-phase supply and ground; no special controller is required. Verify rotation direction matches the airflow arrow before final tightening. Common issues are reversed phase sequence causing wrong airflow and debris ingress if the IP44 seal is damaged during mounting.
Highlights
- Three-phase 400-480VAC supply suits industrial mains
- Dual-frequency 50/60Hz operation matches global grids
- IP44 rating protects against splashing water
- Class F insulation handles elevated temperatures
- Ball-bearing motor reduces friction for longer service
Specifications
| Series | M2D068-BF |
|---|---|
| Model | M2D068-BF |
| Type | AC axial fan |
| Bearing Type | Ball |
| Power Connector | 4 Wires |
| Color | Black |
| LED | Non-LED |
| Features | AC Axial Fan |
| Dimensions | 160mm |
Questions about this item
What size cut-out does the 160 mm frame require for panel mounting?
The fan has a 160 mm square frame, so a matching 160 mm cut-out is needed for a flush panel mount.
How are the four wires connected for 3-phase 400–480 VAC operation?
Three wires carry the 3-phase supply and the fourth is the protective earth; follow the motor name-plate diagram for correct phase sequence.
When should the ball bearings be inspected or the fan replaced?
Inspect bearings at regular service intervals; replace the unit if vibration, noise or temperature rise exceeds normal levels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
