ZOTAC
ZOTAC GeForce RTX 2060 Twin Fan 6GB GDDR6 ZT-T20600F-10M graphics card
A compact PCI Express 3.0 graphics card with 6GB GDDR6 memory, 1920 CUDA cores and dual-fan IceStorm 2.0 cooling, boosting to 1680 MHz for RTX and DLSS support
- InterfacePCI Express 3.0
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 20 Series
- GPUGeForce RTX 2060
- Boost Clock1680 MHz
- CUDA Cores1920
- Real-time raytracing and DLSS AI upscaling powered by Turing architecture
- Super compact 8.3-inch dual-slot design fits 99% of systems
- IceStorm 2.0 dual-fan cooling keeps the 160W GPU stable
- 6GB GDDR6 on a 192-bit bus at 14.0 Gbps effective speed
- Four-display support via three DisplayPort 1.4 and one HDMI 2.0b
Compact dual-fan RTX 2060 for mainstream builds
The ZOTAC GeForce RTX 2060 Twin Fan uses a 192-bit GDDR6 frame buffer and 1920 CUDA cores to deliver 1080p and 1440p performance in a card measuring 8.3 inches. It connects through a PCI Express 3.0 slot and draws up to 160 W, so most mid-range power supplies handle it without extra cables.
Sustained load behaviour with IceStorm 2.0 cooling
Under continuous gaming the twin-fan cooler keeps the GPU near its 1680 MHz boost clock while memory runs at 14.0 Gbps. The dual-slot design exhausts heat toward the rear bracket, helping case airflow stay stable during long sessions rather than throttling after a short burst.
Straightforward installation in 99% of systems
The super-compact length lets the card slide into tight chassis without removing drive cages. A single 8-pin power connector is all that is required; the most common issue is forgetting to seat the connector fully, which prevents the card from posting. Four display outputs — three DisplayPort 1.4 and one HDMI 2.0b — support up to four monitors.
Highlights
- Real-time raytracing and DLSS AI upscaling powered by Turing architecture
- Super compact 8.3-inch dual-slot design fits 99% of systems
- IceStorm 2.0 dual-fan cooling keeps the 160W GPU stable
- 6GB GDDR6 on a 192-bit bus at 14.0 Gbps effective speed
- Four-display support via three DisplayPort 1.4 and one HDMI 2.0b
Specifications
| Brand | ZOTAC |
|---|---|
| Model | ZT-T20600F-10M |
| Interface | PCI Express 3.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 20 Series |
| GPU | GeForce RTX 2060 |
| Boost Clock | 1680 MHz |
| CUDA Cores | 1920 |
| Effective Memory Clock | 14.0 Gbps |
| Memory Size | 6GB |
| Memory Interface | 192-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.5 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.0b |
| DisplayPort | 3 x DisplayPort 1.4 |
| Color | Silver |
| Cooler | Double Fans |
| Thermal Design Power | 160W |
| Recommended PSU Wattage | 500W |
| Power Connector | 8-Pin |
| HDCP Ready | Yes |
| Max GPU Length | 210 mm |
| Card Dimensions (L x H) | 8.30" x 4.70" |
| Slot Width | 2 Slots |
| Shipping weight | 1.07 kg |
| Package size | 325 × 221 × 86 mm |
Questions about this item
How much heat does the 160W TDP put out during long sessions?
The card draws up to 160W under load, so expect noticeable warmth; ensure your case airflow can move that heat away.
My PSU only has one 8-pin PCIe connector — will that power the RTX 2060?
Yes, the board needs a single 8-pin PCIe power connector; verify your PSU supplies one before installing.
Will the 8.3-inch length and dual-slot width fit alongside my older PCIe 2.0 motherboard?
The 8.3-inch, dual-slot design fits 99% of systems and runs at PCIe 3.0 speeds, which is backward compatible with PCIe 2.0 slots.
New to this? How to buy a graphics card with Bitcoin — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
$174.99
0.00210786BTC
In stock
minisforum
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
$6.99
0.0000842BTC
In stock