We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil 100 ft length 1/2 inch inner diameter 5/8 inch outer diameter

Zoro Select

Zoro Select ZUSA-HT-1114 PVC Tubing Trap 1/2" ID x 5/8" OD 100 ft

SKU CH-VKZJ-4MVAF

Clear PVC tubing rated for food, beverage and water use with a 20 psi working pressure and 140 °F temperature limit

  • ColorClear
  • Clear PVC lets you monitor flow visually
  • Shore A 60 hardness keeps shape under 20 psi pressure
  • Rated to 140 °F for hot beverage lines
  • Peristaltic-pump compatible for metered dispensing
  • 100 ft continuous coil reduces splice points

Product Identity

Zoro Select ZUSA-HT-1114 is clear PVC tubing sized at 1/2" inside diameter by 5/8" outside diameter and supplied in a 100 ft coil. It is manufactured to a Shore A 60 hardness for flexible handling in fluid-transfer tasks.

Suitable Uses and Limits

The tubing is rated for beverage, food and water contact, making it a fit for potable-water lines, drink dispensing or light-duty laboratory work. Buyers needing higher-pressure service, aggressive chemical resistance or operation above 140 Degrees F should look at alternative materials.

Capacity and Headroom

The 100 ft length provides long continuous runs without joints, while the 20 psi maximum pressure and 140 Degrees F temperature ceiling define the safe operating envelope. Peristaltic pump compatibility adds versatility for metered dosing, but the pressure limit restricts use in high-head or compressed-air systems.

Highlights

  • Clear PVC lets you monitor flow visually
  • Shore A 60 hardness keeps shape under 20 psi pressure
  • Rated to 140 °F for hot beverage lines
  • Peristaltic-pump compatible for metered dispensing
  • 100 ft continuous coil reduces splice points

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

What pump fittings do I need for the 1/2 in inside diameter and 5/8 in outside diameter tubing?

Use barbed or compression fittings sized for 1/2 in ID and 5/8 in OD PVC; the clear tubing has Shore A 60 hardness and handles up to 20 psi at 140 °F.

Can I connect this clear PVC line to existing poly or rubber hose on my beverage system?

Yes, match the 1/2 in ID and 5/8 in OD with compatible barbed fittings and clamps; the tubing is rated for food, beverage and water use at 20 psi.

How do I confirm the 100 ft coil is flowing correctly after installation?

Check for clear, steady flow without kinks or leaks at fittings; verify pressure stays below 20 psi and fluid temperature does not exceed 140 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.