Zoro Select
Zoro Select PN31XG57001G Rotor Blade 38 mm 1.4 mm Pack of 4
Bakelite rotor blade set of four, 38 mm long by 1.4 mm wide, fits Speedaire models SM-6U-6105 and SM-6Z-6105
- Bakelite construction resists wear inside pneumatic motors
- 38 mm length fits SM-6U-6105 and SM-6Z-6105 models
- 4 mm width matches original vane slot dimensions
- Pack of four replaces a full rotor set in one order
- California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm
What this rotor blade kit does
The Zoro Select PN31XG57001G Rotor Blade kit supplies four Bakelite vanes for pneumatic rotary vane motors and vane-type compressors. Each blade measures 38 mm in overall length and 1.4 mm in width. The set is designed as an internal wear component that slides into rotor slots during maintenance or rebuild work.
Compatibility check before ordering
Verify that your equipment matches Speedaire brand units and the manufacturer model numbers SM-6U-6105 or SM-6Z-6105. Confirm the rotor slot dimensions accept a 38 mm long by 1.4 mm wide vane. This pack contains exactly four pieces and is not intended for other motor series or vane sizes.
Materials and operating notes
Bakelite construction provides the structural basis for the sliding vane function inside the motor assembly. The material handles the reciprocating motion and compression cycles typical of pneumatic rotary vane applications. No lubrication specifications, temperature limits or noise ratings are supplied by the manufacturer for this component.
Highlights
- Bakelite construction resists wear inside pneumatic motors
- 38 mm length fits SM-6U-6105 and SM-6Z-6105 models
- 4 mm width matches original vane slot dimensions
- Pack of four replaces a full rotor set in one order
- California Proposition 65 warning: contains chemicals linked to cancer and reproductive harm
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What comes in the PN31XG57001G pack and is anything else needed to install the blades?
The pack contains four Bakelite rotor blades measuring 38 mm by 1.4 mm; no additional hardware is included, so you will need the retaining pins or springs specified by the motor manufacturer.
How do I know which of the listed Speedaire models the PN31XG57001G blades fit?
They are confirmed for Speedaire models SM-6U-6105 and SM-6Z-6105; match the model plate on your motor to one of those numbers before ordering.
What does the 38 mm length mean once the blade is inside a rotary vane motor?
It is the overall end-to-end dimension of each vane, so the rotor slot must be at least 38 mm long to accept the blade without binding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
