Zoro Select
Zoro Select N04122.075.0001 Hex Nut 3/4"-10 Steel Grade 8 Zinc Yellow
Grade 8 steel hex nut with 3/4"-10 threads and zinc yellow finish for high-strength fastening
- TypeNuts
- Grade 8 steel delivers high-strength fastening
- Zinc yellow finish resists corrosion in harsh environments
- ASME B 18.2.2 and SAE J995 standards ensure dimensional accuracy
- Right-hand 3/4"-10 threads fit standard inch hardware
- Made in USA with REACH-compliant materials
Zoro Select Grade 8 Hex Nut
The Zoro Select N04122.075.0001 is a 3/4"-10 hex nut manufactured from Grade 8 steel with a zinc yellow finish. It meets ASME B 18.2.2 and SAE J995 dimensional and material quality standards for high-strength fastening applications. This hardware suits automotive, industrial, and structural assemblies requiring reliable clamp load.
Right-hand thread and standard hex profile
The nut features a standard hex profile with a 1 7/64 in width and 41/64 in height for conventional wrench engagement. Right-hand threading ensures compatibility with common bolts and studs in inch-based systems. The zinc yellow coating provides corrosion resistance while the removable design allows for disassembly and reuse when required.
High-strength steel for demanding loads
Grade 8 steel construction delivers the tensile strength needed for heavy-duty joints under vibration and dynamic loads. The zinc yellow finish withstands exposure to moisture and road salts in typical service environments. REACH compliance confirms adherence to regulated substance restrictions for safer handling.
Highlights
- Grade 8 steel delivers high-strength fastening
- Zinc yellow finish resists corrosion in harsh environments
- ASME B 18.2.2 and SAE J995 standards ensure dimensional accuracy
- Right-hand 3/4"-10 threads fit standard inch hardware
- Made in USA with REACH-compliant materials
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Nuts |
Questions about this item
What thread standard does the 3/4"-10 hex nut follow, and what does that limit?
The nut uses ASME B18.2.2 inch threads, so it only mates with matching 3/4"-10 bolts or studs.
What wrench size and clearance does the 1 7/64 in hex width and 41/64 in height require?
A 1 7/64 in wrench or socket fits the hex; the 41/64 in height needs at least that much vertical space above the joint.
How is the Grade 8 zinc-yellow nut installed, and what torque step is often missed?
Thread it onto a clean 3/4"-10 bolt by hand, then torque to the SAE J995 Grade 8 specification for the bolt size — skipping the calibrated torque step risks under- or over-tightening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
