Zoro Select
Zoro Select M37060.140.0001 Split Lock Washer M14 Steel Zinc
M14 split lock washer in spring steel with yellow zinc finish, DIN 127 B compliant, 100 pieces
- TypeWashers
- SizeM14
- Helps prevent loosening under vibration with split-ring spring action
- Fits M14 bolts precisely using 14.2 mm inside diameter
- Resists corrosion in harsh environments with yellow zinc finish
- Meets DIN 127 B standard for reliable spring-steel performance
- Supplied in 100-piece pack for high-volume assembly needs
Zoro Select M14 Split Lock Washer
This Zoro Select split lock washer fits M14 bolt sizes and is made from spring steel to DIN 267-26. It has a yellow zinc finish with a grey colour. The inside diameter is 14.2 mm, outside diameter 24.1 mm, and thickness 3.0 mm. It meets or exceeds DIN 127 B standards.
For General-Purpose M14 Fastening
These washers suit general-purpose applications needing M14 split lock washers with square ends. They are not for buyers who need a different bolt size or a different washer type such as flat or tooth lock washers. The pack contains 100 pieces for volume use.
M14 Size and DIN 127 B Compliance
The critical specification is the M14 size combined with DIN 127 B compliance for split lock washers. Verify your bolt diameter and the required standard before ordering. The spring steel construction and zinc finish provide corrosion resistance for standard environments.
Highlights
- Helps prevent loosening under vibration with split-ring spring action
- Fits M14 bolts precisely using 14.2 mm inside diameter
- Resists corrosion in harsh environments with yellow zinc finish
- Meets DIN 127 B standard for reliable spring-steel performance
- Supplied in 100-piece pack for high-volume assembly needs
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Washers |
| Size | M14 |
Questions about this item
Will the 14.2 mm inside diameter fit the M14 bolts I already use?
Yes, the 14.2 mm inside diameter matches M14 bolt shanks so the washer seats properly on your existing hardware.
How can I confirm the washer is providing the correct locking tension after installation?
The split ends should bite into both the nut face and the mounting surface; if the nut resists turning by hand the spring tension is working.
Does the pack of 100 include any nuts or bolts, or must I supply those separately?
The box contains only the 100 split lock washers; matching M14 nuts and bolts are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
