Zoro Select
Zoro Select M04122.140.0001 Hex Nut M14-2.00 Class 10 Zinc Yellow 11 mm
M14-2.00 Class 10 steel hex nut with zinc yellow finish, 22 mm width, 11 mm height, DIN 934 standard
- TypeNuts
- Class 10 steel delivers high-strength fastening
- Zinc yellow finish resists corrosion in harsh environments
- M14×2.00 metric thread fits standard coarse-pitch bolts
- DIN 934 dimensional standard ensures reliable interchangeability
- 11 mm hex height and 22 mm width suit common wrench sizes
Zoro Select M14 Class 10 Hex Nut
This zinc-yellow steel hex nut conforms to DIN 934 and DIN 267-4 standards for metric fasteners. It features an M14 thread with a 2.00 mm pitch and a right-hand thread direction. The Class 10 rating indicates a maximum Rockwell hardness of HRC 36. It is supplied new in a small pack.
Metric M14 interface and DIN 934 dimensional limits
The nut fits M14 x 2.00 male threads only; it will not engage with coarse, fine or inch-series counterparts. DIN 934 fixes the width across flats at 22 mm and the height at 11 mm, so the mating bolt and the installation tool must match those dimensions. The zinc yellow finish provides corrosion resistance but adds no thread-locking function.
Class 10 strength rating determines suitability
The heat-treated steel reaches a maximum Rockwell hardness of HRC 36, defining the proof load and tensile capacity for structural joints. Engineers must verify that this strength class meets the design safety factor for the intended assembly. Buyers who need a higher property class or a different thread pitch cannot use this part.
Highlights
- Class 10 steel delivers high-strength fastening
- Zinc yellow finish resists corrosion in harsh environments
- M14×2.00 metric thread fits standard coarse-pitch bolts
- DIN 934 dimensional standard ensures reliable interchangeability
- 11 mm hex height and 22 mm width suit common wrench sizes
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Nuts |
Questions about this item
Should I choose the M14-2.00 thread size or a different diameter?
Select the M14-2.00 nut when the mating bolt or stud has a 14 mm diameter and a 2.00 mm pitch; the 22 mm hex width and 11 mm height match standard DIN 934 dimensions for this size.
What does Class 10 mean for clamping force in my assembly?
Class 10 denotes a high-strength steel nut rated to a maximum Rockwell hardness of HRC 36, suitable for joints that require greater preload than lower property classes.
Does the DIN 934 standard limit the nut's compatibility with other hardware?
DIN 934 defines the hex geometry and thread tolerances; any M14-2.00 bolt or stud made to the same metric standard will engage correctly with this nut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
