Zoro Select
Zoro Select M04122.100.0001 Hex Nut M10-1.50 Steel Class 10 Zinc Yellow
M10-1.50 Class 10 steel hex nut with zinc yellow finish, DIN 934 standard, 17 mm across flats, 8 mm height, HRC 36 max hardness
- TypeNuts
- M10-1.50 metric thread fits standard fasteners
- Class 10 steel rated to HRC 36 max for high strength
- Zinc yellow finish resists corrosion in harsh environments
- Manufactured to DIN 934 and DIN 267-4 dimensional standards
- Pack of 8 nuts ready for immediate assembly
Zoro Select M10 Hex Nut
This Zoro Select hex nut is a Class 10 steel fastener with a zinc yellow finish. It follows DIN 934 dimensional standards and DIN 267-4 material quality standards. The metric thread size is M10-1.50 with right-hand thread direction. It is sold as a small pack of eight pieces.
Suited for metric M10 assemblies
Builders needing a high-strength Class 10 metric fastener for M10-1.50 threads will find this nut suitable. The zinc yellow finish provides corrosion resistance for general industrial or automotive use. It is not for buyers who require a different thread pitch, diameter, or material grade such as stainless steel or Class 8. It also does not suit applications needing a locking feature or left-hand thread direction.
Check thread pitch and class requirement
Verify that the mating bolt or stud uses an M10-1.50 metric thread before ordering. Confirm that a Class 10 strength rating meets the structural demands of the assembly. Ensure the 17 mm hex width fits the available tool clearance. Note the California Proposition 65 warning regarding chemicals known to cause cancer and reproductive harm.
Highlights
- M10-1.50 metric thread fits standard fasteners
- Class 10 steel rated to HRC 36 max for high strength
- Zinc yellow finish resists corrosion in harsh environments
- Manufactured to DIN 934 and DIN 267-4 dimensional standards
- Pack of 8 nuts ready for immediate assembly
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Nuts |
Questions about this item
What thread size must the bolt or stud have for this M10-1.50 hex nut to fit?
The nut requires a matching M10 thread with a 1.50 mm pitch.
Will a 17 mm spanner or socket I already own work on this nut?
Yes, the hex width is 17 mm, so standard 17 mm tools engage it directly.
How can I verify the nut meets the stated Class 10 strength after installation?
Check for the Class 10 marking on the nut face and confirm it conforms to DIN 934 and DIN 267-4 standards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
