Zoro Select
Zoro Select M04122.080.0001 Hex Nut M8-1.25 Class 10 Zinc Yellow 100 pack
Pack of 100 M8-1.25 Class 10 steel hex nuts with zinc yellow finish, 13 mm width and 6.5 mm height to DIN 934
- TypeNuts
- Class 10 steel delivers high tensile strength
- Zinc yellow finish resists corrosion in harsh environments
- M8 × 1.25 metric thread fits standard applications
- 13 mm hex width allows common tool engagement
- Supplied in a 100-piece pack for volume use
Zoro Select M8 Class 10 Hex Nuts
This pack contains one hundred M8-1.25 hex nuts manufactured to DIN 934 dimensions from Class 10 steel with a zinc yellow finish. Each nut measures 13 mm across the flats and 6.5 mm in height. The right-hand metric threads suit standard M8 bolts and studs in automotive, industrial and general assembly tasks. The bulk quantity supports maintenance shops and production lines that need consistent stock on hand.
Upgrading from lower-grade or plain fasteners
Class 10 steel provides higher proof load than Class 8 or ungraded nuts, so the jump is worthwhile when joint integrity is critical or when the original specification calls for property class 10. The zinc yellow coating adds corrosion resistance compared with bare steel, extending service life in environments with moisture or road salt. Switching to this pack also standardises inventory around a single DIN 934 reference, reducing the risk of mixing grades during repairs.
Check thread pitch and clearance before ordering
Verify that the mating bolts are M8 with a 1.25 mm pitch; a coarse M8-1.0 or fine M8-1.5 thread will not engage correctly. Confirm that a 13 mm spanner or socket fits the installation space, as the hex width is fixed by the DIN 934 standard. Ensure the application does not require a prevailing-torque lock nut, a flange nut or a different property class, because this item is a standard hex nut only. The California Proposition 65 notice indicates the presence of listed chemicals, so handle accordingly.
Highlights
- Class 10 steel delivers high tensile strength
- Zinc yellow finish resists corrosion in harsh environments
- M8 × 1.25 metric thread fits standard applications
- 13 mm hex width allows common tool engagement
- Supplied in a 100-piece pack for volume use
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Nuts |
Questions about this item
What thread size and pitch does the M8 hex nut use?
The nuts have an M8 thread diameter with a 1.25 mm pitch, matching standard metric coarse threading.
Which wrench size fits the 13 mm hex flats during installation?
Use a 13 mm spanner or socket; the flats measure 13 mm across and the nut height is 6.5 mm.
Does the zinc-yellow finish need any special handling or replacement schedule?
The zinc-yellow coating resists corrosion under normal use; replace nuts if threads show damage or the finish wears through.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
