Zoro Select
Zoro Select HTGRD796YW Clearance Bar 96 in Yellow
A 96-inch yellow HDPE clearance bar with two eye hooks for dock visibility
- 96 in overall length spans wide dock openings
- 7 3/8 in outside diameter clears tall vehicles
- HDPE construction resists saltwater corrosion
- Bright yellow finish stays visible in low light
- Two eye hooks included for quick installation
Zoro Select Clearance Bar 96 Inch
The Zoro Select HTGRD796YW is a high-visibility clearance bar designed for dock and marine environments. Its 96 inch length and bright yellow colour make it easy to spot from a distance. Constructed from durable HDPE, it resists weather and impact. Two eye hooks are included for straightforward mounting.
Suits Dock Safety Marking, Not Load Bearing
This bar works well for facilities that need a clear visual warning to prevent vehicle or boat collisions. It is not intended as a structural guard rail or a load-bearing barrier. Buyers who need a rated impact barrier or a barrier that meets specific highway standards should look at a different product class. The simple eye-hook mounting also limits use to locations where anchors can be installed.
96 Inch Span With HDPE Durability
At 96 inches long the bar covers a wide doorway or slip entrance in a single piece. The HDPE material handles sun, salt spray and temperature swings without rust or rot. It runs out of usefulness where a physical stop is required rather than a visual cue, or where mounting points cannot accept the supplied eye hooks.
Highlights
- 96 in overall length spans wide dock openings
- 7 3/8 in outside diameter clears tall vehicles
- HDPE construction resists saltwater corrosion
- Bright yellow finish stays visible in low light
- Two eye hooks included for quick installation
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What mounting hardware do I need to install the 96 in clearance bar?
The bar includes two eye hooks for attachment; you supply the rope, chain or mounting brackets that suit your dock layout.
Will the 7-3/8 in outside diameter fit through the existing guide rollers on my older dock?
Measure the roller opening — if it exceeds 7-3/8 in the bar will pass through; otherwise the rollers must be widened or replaced.
How can I confirm the HTGRD796YW bar is seated correctly after installation?
Check that the yellow HDPE tube runs straight, the eye hooks are tight and the bar clears approaching hulls by the full 96 in length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



