Zoro Select
Zoro Select GRUVLOK Reducing Tee 4" x 4" x 2-1/2" 1000 psi fluid
A grooved ductile-iron reducing tee connects 4-inch and 2-1/2-inch pipe runs at 750 psi from -40 to 230 °F and is certified for potable water
- Handles temperatures from -40 to 230 °F
- Certified for potable water use
- Ductile iron construction resists corrosion
- Grooved connection speeds installation
- Rated for 750 PSI working pressure
GRUVLOK Reducing Tee for Piping Systems
The GRUVLOK reducing tee connects three grooved pipe sections at a 4 by 4 by 2-1/2 inch nominal size. It is built from ductile iron with an orange finish and rated for 750 PSI working pressure. The fitting operates across a temperature range of -40 to 230 F. It is certified for use in potable water applications.
Suited for Grooved Mechanical Joint Installations
This tee suits installers assembling grooved piping systems that require a branch reduction from four inches to two and a half inches. It is not intended for threaded, flanged or welded connections. Buyers who need a different branch size or a higher pressure rating should look at alternative fittings. The ductile iron construction also makes it unsuitable for systems requiring non-ferrous materials.
Capacity Handles 750 PSI and Wide Temperature Span
The fitting comfortably handles 750 PSI working pressure within the stated temperature limits of -40 to 230 F. It runs out when system pressure exceeds this rating or when operating temperatures fall outside the certified range. The potable water certification covers standard domestic supply conditions. Applications demanding higher pressure or extreme temperatures require a different specification.
Highlights
- Handles temperatures from -40 to 230 °F
- Certified for potable water use
- Ductile iron construction resists corrosion
- Grooved connection speeds installation
- Rated for 750 PSI working pressure
Specifications
| Brand | GRUVLOK |
|---|
Questions about this item
What pipe sizes and grooved connections must already be in place for the 4" x 4" x 2-1/2" reducing tee to install?
The tee requires grooved pipe ends matching its 4-inch run and 2-1/2-inch branch dimensions for a mechanical coupling fit.
Will the ductile iron body and orange coating hold up when joined to older steel piping at the rated 750 psi working pressure?
Yes, the ductile iron construction and certified coating are compatible with standard grooved steel pipe at the stated 750 psi pressure rating.
After assembly, how can I confirm the joint is leak-free across the -40 to 230 °F temperature range?
Pressurise the system to its design pressure and visually inspect all three grooved couplings for seepage while the line cycles through operating temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
