Zoro Select
Zoro Select GRUVLOK 0390173631 Clamp-T 6x2" Iron 500psi
A ductile-iron grooved-branch clamp rated for 500 psi and certified for potable water systems
- Potable-water certified for safe drinking systems
- Ductile iron body withstands 750 PSI service pressure
- Rated 500 PSI for reliable branch connections
- Operates from -40 to 230 °F temperature range
- Orange coating aids quick visual identification
6 x 2 Inch Grooved Branch Clamp
This ductile-iron clamp provides a grooved mechanical connection for a 6-inch main pipe and a 2-inch branch. It is intended for installers and maintenance teams who need a fast, bolted joint on compatible grooved piping systems. The orange coating identifies the fitting on site and the component is certified for potable water use.
Sustained pressure and temperature performance
The assembly is rated for continuous service at 500 psi and operates reliably across a temperature span of -40 to 230 degrees Fahrenheit. Grooved engagement distributes load evenly so the joint resists vibration and thermal cycling without loosening or leaking over long periods.
Replaces flanged or welded branch fittings
The clamp eliminates the time and cost of flange alignment, gasket handling or field welding on a 2-inch branch take-off. The upgrade is worth it when a project demands faster installation, future disassembly for maintenance, or a lighter ductile-iron alternative to traditional fabricated tees.
Highlights
- Potable-water certified for safe drinking systems
- Ductile iron body withstands 750 PSI service pressure
- Rated 500 PSI for reliable branch connections
- Operates from -40 to 230 °F temperature range
- Orange coating aids quick visual identification
Specifications
| Brand | GRUVLOK |
|---|
Questions about this item
How much heat can the ductile iron body handle during continuous operation?
The fitting is rated for a temperature range of -40 to 230 F, so it will withstand typical hot-water or steam service without degrading.
What pipe sizes and groove profiles must already be in place for this Clamp-T to seal correctly?
It requires a 6 5/8 in outside-diameter run pipe and a 2 3/8 in outside-diameter branch pipe, both prepared with standard grooved ends.
Will the 500 psi rating hold when connecting to older grooved pipe that was made to a lower pressure class?
The joint is rated at 750 PSI, which exceeds the 500 psi design pressure, so it will maintain a seal on legacy grooved pipe as long as the grooves meet the same dimensional standard.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
