We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PVC fuel tubing coil 100 ft 1/8 in ID 1/4 in OD

Zoro Select

Zoro Select Fuel Tubing PVC 1/8 in ID 1/4 in OD 100 ft Yellow

SKU CH-QV39-J81MR

Yellow PVC tubing carries fuel, lubricant or water at up to 20 psi and 140 °F, with 1/8 in ID, 1/4 in OD and 100 ft length

  • ColorYellow
  • Clear fuel flow monitoring with yellow colour coding
  • Handles fuels, lubricants and water in one line
  • Resists hardening and swelling for longer service life
  • Works with peristaltic pumps for versatile transfer
  • 20 psi and 140 °F ratings suit low-pressure systems

1/8 in ID PVC Fuel Tubing 100 ft

This yellow PVC tubing has a 1/8 in inside diameter and 1/4 in outside diameter supplied in a 100 ft coil. It is rated for 20 psi maximum operating pressure and 140 Degrees F maximum operating temperature. The material carries a Shore A 60 hardness rating and resists hardening and swelling. It is compatible with peristaltic pumps.

Suits fuel and lubricant lines.

The tubing handles fuels, lubricants and water in low-pressure applications where 20 psi and 140 Degrees F are sufficient. Buyers who need higher pressure ratings or different chemical resistance should look at other products.

20 psi maximum operating pressure decides fit

The 20 psi pressure ceiling is the single specification that determines whether this tubing matches the system requirements. Verify the working pressure of the circuit before purchase.

Highlights

  • Clear fuel flow monitoring with yellow colour coding
  • Handles fuels, lubricants and water in one line
  • Resists hardening and swelling for longer service life
  • Works with peristaltic pumps for versatile transfer
  • 20 psi and 140 °F ratings suit low-pressure systems

Specifications

ColorYellow
BrandZORO SELECT

Questions about this item

What are the inside and outside diameters of this fuel tubing?

The tubing has an inside diameter of 1/8 in and an outside diameter of 1/4 in.

How do I install this tubing correctly on barbed fittings?

Warm the PVC in hot water to soften it, push fully over the barb until it seats against the fitting body, then secure with a hose clamp; the common error is skipping the warming step and leaving a leak path.

When should I replace this PVC fuel tubing?

Replace it if the material hardens, cracks, swells, or loses its yellow colour, or after prolonged exposure near the 140 °F temperature limit or 20 psi pressure limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.