Zoro Select
Zoro Select Conveyor Tripod Stand 42 to 60 in 9-1/2 in W
Portable steel tripod stand adjusts from 42 to 60 inches high and supports 400 lb loads
- TypeWheelbarrows & Carts
- Portable tripod adjusts from 42 to 60 in for flexible conveyor height
- Steel construction supports up to 400 lb stand load capacity
- 12 in overall width fits 10 in between-frame conveyors
- Green powder-coat finish resists corrosion in yard environments
- Light-duty design enables quick repositioning on job sites
Portable Conveyor Tripod Stand
The Zoro Select conveyor tripod stand adjusts from 42 to 60 inches high and measures 12 inches wide overall. It is a portable support designed for light-duty conveyor sections. The steel frame is finished in green and rated for a 400 lb stand load capacity.
Light-duty conveyor installers
This stand suits installers who need a quick, portable support for conveyor frames with a 10 inch between-frame width. It is not intended for heavy industrial systems that exceed the 400 lb rating or for permanent installations requiring fixed, bolted supports.
Capacity and headroom
The 400 lb load rating comfortably handles typical light-duty conveyor sections and conveyed items within that limit. Headroom ends when the combined weight of the conveyor frame and material approaches the rated capacity, at which point a heavier-duty stand becomes necessary.
Highlights
- Portable tripod adjusts from 42 to 60 in for flexible conveyor height
- Steel construction supports up to 400 lb stand load capacity
- 12 in overall width fits 10 in between-frame conveyors
- Green powder-coat finish resists corrosion in yard environments
- Light-duty design enables quick repositioning on job sites
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What between-frame width must my conveyor have to fit this 10 in stand?
The stand accepts conveyors with a 10 in between-frame width.
Will the 12 in overall width clear the frame of my older conveyor section?
The stand measures 12 in overall width, so check your conveyor frame clearance against that figure.
How do I confirm the tripod is safely set between 42 and 60 in?
Extend the legs until the height scale shows a value between 42 and 60 in, then lock each leg securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
