Zoro Select
Zoro Select Carriage Bolt M6-1.00×50 mm A2 Stainless Steel PK50
Pack of 50 metric M6-1.00 carriage bolts with square neck, A2 stainless steel, 50 mm length, DIN 603
- TypeScrews & Bolts
- A2 stainless steel resists corrosion in wet environments
- Square neck locks into wood to prevent bolt spin
- DIN 603 standard ensures consistent dimensions and fit
- Metric coarse M6-1.00 thread matches common hardware
- Pack of 50 covers multiple fastening jobs
Carriage bolts for metric assemblies
This pack contains fifty M6 carriage bolts with a 1.00 mm coarse thread pitch and 50 mm length. The square neck locks into a matching hole to prevent rotation while a nut is tightened. A2 stainless steel provides general corrosion resistance for indoor and outdoor fixtures. Builders assembling timber frames, metal brackets or trailer decks will find the quantity convenient.
Fits M6 hardware and frees installation time
Each bolt requires a standard M6 nut and an optional washer; the 15.45 to 16.55 mm round head seats flush without a separate washer face. The 6.48 mm square neck drops into pre-punched or drilled square holes, eliminating the need to hold the bolt head during tightening. DIN 603 dimensions ensure interchangeability with other metric carriage bolts in the same size class.
Holds clamp load under prolonged tension
The A2 grade delivers a tensile strength of 101, 500 psi, so the fastener resists stretching when joints are subjected to sustained vibration or seasonal wood movement. Right-hand metric coarse threads maintain engagement over long clamping distances. Plain finish avoids hydrogen embrittlement risks that can affect plated alternatives in critical structural connections.
Highlights
- A2 stainless steel resists corrosion in wet environments
- Square neck locks into wood to prevent bolt spin
- DIN 603 standard ensures consistent dimensions and fit
- Metric coarse M6-1.00 thread matches common hardware
- Pack of 50 covers multiple fastening jobs
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Screws & Bolts |
Questions about this item
At what load does the M6 carriage bolt reach its 101,500 psi tensile limit during continuous stress?
The bolt is rated at 101,500 psi tensile strength; sustained loads approaching this value risk permanent deformation or failure.
Does the A2 stainless bolt generate heat or require cooling when left under clamp force all day?
A static fastener produces no heat and needs no cooling; the A2 stainless material resists corrosion without thermal management.
What matching M6-1.00 coarse-thread nut and washer must I already have to install these 50 mm carriage bolts?
You need M6-1.00 metric coarse nuts and flat or spring washers; the square neck (6.48 mm wide, 4.60 mm high) locks into a pre-drilled square hole.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
