We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three FNPT ports

Zoro Select

Zoro Select 810051409 Reducing Tee 2" x 3/4" x 2" FNPT

SKU CH-BT6Y-FBKM2

Malleable-iron reducing tee connects 2 in. and 3/4 in. FNPT pipes at up to 300 psi and 150 °F, meeting ASME B16.3 with UL and FM approval

  • Malleable iron body resists corrosion for long service life
  • Class 150 rating handles 300 psi at 150 °F for demanding systems
  • FNPT threads on all three ports enable direct pipe connection
  • UL Listed and FM Approved for code-compliant installations
  • Meets ASME B16.3 standard ensuring dimensional accuracy and quality

Product identity

The Zoro Select 810051409 is a malleable iron reducing tee sized at 2 inches by 3/4 inches by 2 inches with FNPT connections. It is built for plumbing professionals and maintenance crews who need a Class 150 branch fitting in steam, water or air lines.

Sustained-load behaviour

Rated for 300 psi at 150 degrees F and 150 psi saturated steam, the fitting holds its seal across the full minus 20 to 150 degrees F range. UL listing and FM approval confirm it meets recognised safety standards for continuous service in commercial and industrial piping systems.

Deciding specification

The 2 by 3/4 by 2 inch FNPT configuration is the single detail that determines whether this tee matches the branch size and thread type required by your piping layout. If the branch or header dimensions differ, this fitting will not install correctly.

Highlights

  • Malleable iron body resists corrosion for long service life
  • Class 150 rating handles 300 psi at 150 °F for demanding systems
  • FNPT threads on all three ports enable direct pipe connection
  • UL Listed and FM Approved for code-compliant installations
  • Meets ASME B16.3 standard ensuring dimensional accuracy and quality

Specifications

BrandZORO SELECT

Questions about this item

Does the malleable iron body stay cool enough when carrying saturated steam at 150 psi?

The tee is rated for saturated steam at 150 psi and a temperature range up to 150 degrees F, so the body temperature will match the steam temperature under those conditions.

What pipe threads must I already have to connect this 2" x 3/4" x 2" FNPT tee?

You need male NPT threads on all three pipes — two 2-inch and one 3/4-inch — to screw into the female NPT ports of this tee.

Will this Class 150 tee mate with older ASME B16.3 fittings already in my system?

Yes, it meets ASME B16.3, so it will thread onto existing Class 150 malleable iron fittings with matching NPT sizes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.