We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 90-degree street elbow with 1/2 inch NPT female threads

Zoro Select

Zoro Select 7885 Stainless Steel 90° Street Elbow 1/2 in NPT Female equipment

SKU CH-8NET-Z1VPD

A 304 stainless steel 90° street elbow with 1/2 in NPT female ends, rated to 4,600 psi for air, gas, oil, water and steam systems meeting ANSI B31.1

  • 304 stainless steel resists corrosion in harsh environments
  • 90° street elbow redirects flow in tight spaces
  • Female NPT threads on both ends simplify installation
  • Rated to 4600 psi for high-pressure reliability
  • Meets ANSI B31.1 and low-lead potable water standards

1/2 in NPT Street Elbow

The Zoro Select 7885 is a 90 degree street elbow manufactured from 304 stainless steel. It provides corrosion resistance for instrumentation and control piping systems. The fitting creates a directional flow change in a compact form. It is designed for professional plumbing and industrial installations.

4600 psi Pressure Rating

Rated for up to 4600 psi maximum operating pressure, the elbow handles high-pressure air, natural gas, oil, steam, and potable water lines. The 14 TPI NPT threads on both female ends create leak-tight joints conforming to ANSI B31.1 standards. It meets low lead requirements for drinking water safety. The schedule limits its use to compatible pressure-rated piping systems.

Female NPT Threaded Connections

Both ends feature 1/2 inch nominal pipe size female NPT threads for direct engagement with male fittings or pipe nipples. The street elbow configuration allows connection to a female port while presenting a female outlet for further piping. No additional adapters are needed for standard NPT assemblies. Installers must verify thread compatibility and system pressure limits before assembly.

Highlights

  • 304 stainless steel resists corrosion in harsh environments
  • 90° street elbow redirects flow in tight spaces
  • Female NPT threads on both ends simplify installation
  • Rated to 4600 psi for high-pressure reliability
  • Meets ANSI B31.1 and low-lead potable water standards

Specifications

BrandZORO SELECT

Questions about this item

Will the 14 TPI NPT threads on this 1/2 inch street elbow seal against older galvanized pipe threads?

Yes, the NPT tapered threads conform to ANSI B31.1, so they will mate with existing 1/2 inch NPT male fittings on galvanized or black iron pipe when sealed with appropriate tape or compound.

How can I verify the 4600 psi rating is holding after installation?

Pressurise the system to its working pressure, then inspect each joint with leak-detection fluid; no bubbles at the 90 degree elbow connection confirms a leak-tight seal per the ANSI B31.1 standard.

Does the ZUSA-PF-7885 come with thread sealant or must I buy it separately?

The fitting is supplied alone; PTFE tape or pipe-thread compound for the 14 TPI NPT ends must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.