Zoro Select
Zoro Select 5CRF6 Poly Tubing 24 in x 1450 ft 3 mil Clear
Clear LDPE poly tubing on a cored roll, 24 in wide by 1450 ft long at 3 mil thickness, FDA compliant for food contact and rated from -60 to 180 °F
- TypePacking Peanuts & Fillers
- Clear LDPE tubing shows contents at a glance
- 3 mil thickness resists punctures during handling
- 1,450 ft roll length reduces change-over frequency
- FDA compliant material suits food-contact applications
- Operates from -60 °F to 180 °F for cold-store and heat-seal use
24 in Poly Tubing for Packaging
This clear low-density polyethylene tubing arrives on a cored roll measuring 24 inches wide and 1450 feet long. It suits operations that need continuous lengths for custom bagging, wrapping or void fill in shipping and storage workflows.
Sustained Use Across Temperature Range
The material maintains flexibility from minus 60 degrees F up to 180 degrees F, so it remains workable in cold warehouses and near heat-sealing equipment without becoming brittle or overly soft. At 3 mil thickness it resists punctures during repeated handling and automated dispensing cycles.
Simple Roll Mounting and Dispensing
The 12 inch roll diameter fits standard 3 inch core holders, allowing quick changeovers on most bagging stations. Misalignment on the spindle can cause edge wrinkling, so ensure the core seats squarely before starting a run.
Highlights
- Clear LDPE tubing shows contents at a glance
- 3 mil thickness resists punctures during handling
- 1,450 ft roll length reduces change-over frequency
- FDA compliant material suits food-contact applications
- Operates from -60 °F to 180 °F for cold-store and heat-seal use
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Packing Peanuts & Fillers |
Questions about this item
How does the 3 mil low-density polyethylene tubing handle continuous heat up to 180 °F?
The LDPE material is rated for a maximum operating temperature of 180 °F and a minimum of -60 °F, so it remains stable during all-day use within that range.
What dispenser or core size is needed to use this 1450 ft roll?
The roll is wound on a 3-inch core and has a 12-inch roll diameter, so it fits standard tubing dispensers that accept those dimensions.
Will this 24-inch wide tubing seal properly with older impulse sealers?
The 24-inch width and 3-mil thickness are compatible with most standard impulse or heat sealers that accommodate that film size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
